Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

400-500F with vulcanized rubber

Status
Not open for further replies.
MacGyverS2000

MacGyverS2000

Electrical
Joined
Dec 22, 2003
Messages
8,504
Location
US
I have a thread in the Automotive Engineering forum I'd like you guys to take a look at dealing with the heat capacity of the rubber used in A-arm mounts. Comments welcome...

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
Sort by date Sort by votes
Most rubbers will not take anything near as hot as 400 - 500°F. However, for brief, intermittent periods only, silicone rubbers and one or two grades of Viton will be OK at up to 300°C (570°F).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lucas88
  • Question Question
Question silicone rubber elastic
Replies
8
Views
12K
btrueblood
btrueblood
H
  • Locked
  • Question Question
Polyamide to EPDM rubber bonding
Replies
4
Views
6K
Henry Chiansky
H
A
  • Locked
  • Question Question
uncured silicon rubber moulding
Replies
1
Views
2K
3DDave
3DDave
Marouane
  • Locked
  • Question Question
Finding Silicone Rubber compatible with Epoxy and Polyurethane Resins
Replies
1
Views
1K
Compositepro
Compositepro
AKHILESH MAURYA
  • Locked
  • Question Question
RUBBER SURFACE PROBLEM
Replies
1
Views
861
btrueblood
btrueblood

Part and Inventory Search

Sponsor

Back
Top