Aug 18, 2005 #2 CorBlimeyLimey Mechanical Nov 5, 2003 15,292 Not that I know of. http://www.panoramafactory.com/discus/messages/17/313.html?1057432320http://aumha.org/win5/a/xpvm.php Helpful SW websites every user should be aware of faq559-520 How to get answers to your SW questions faq559-1091 Upvote 0 Downvote
Not that I know of. http://www.panoramafactory.com/discus/messages/17/313.html?1057432320http://aumha.org/win5/a/xpvm.php Helpful SW websites every user should be aware of faq559-520 How to get answers to your SW questions faq559-1091
Aug 18, 2005 #3 SBaugh Mechanical Mar 6, 2001 6,686 Only XP Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376 Upvote 0 Downvote
Aug 18, 2005 Thread starter #4 Drhinehart Mechanical Apr 21, 2004 64 That is what I was thinking. We are having memory trouble with some of our larger drawings. When we set resolved and turn Large Assembly Mode off we get a not enough memory error. Upvote 0 Downvote
That is what I was thinking. We are having memory trouble with some of our larger drawings. When we set resolved and turn Large Assembly Mode off we get a not enough memory error.
Aug 18, 2005 #5 SBaugh Mechanical Mar 6, 2001 6,686 How much RAM are running? Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376 Upvote 0 Downvote
Aug 18, 2005 Thread starter #6 Drhinehart Mechanical Apr 21, 2004 64 I have tried to open it on both a 1gb (original machine) and a 2gb station and get the same error on both. I have a meeting here in about 5 minutes, when I get out I will give you the specs for our work stations maybe you can offer some insight. Upvote 0 Downvote
I have tried to open it on both a 1gb (original machine) and a 2gb station and get the same error on both. I have a meeting here in about 5 minutes, when I get out I will give you the specs for our work stations maybe you can offer some insight.
Aug 18, 2005 #7 PDMAdmin Mechanical Apr 21, 2004 488 It might be time to consider upgrading to XP for two reasons: 1) The memory issue. (Also see thread thread559-107229) 2) SW2006 is the last release that will support Windows 2000. Upvote 0 Downvote
It might be time to consider upgrading to XP for two reasons: 1) The memory issue. (Also see thread thread559-107229) 2) SW2006 is the last release that will support Windows 2000.
Aug 19, 2005 #8 StefanHamminga Mechanical Jul 18, 2005 354 I believe SW give a "out of memory" error when approaching the 1.6 barrier, was that the error you got or did you get exactly the message you stated? Might be obvious, but did you check your page file settings? I happend to me once, after I re-installed I forgot to set it... Stefan Hamminga Mesken BV 2005 Certified SolidWorks Professional Mechanical designer/AI student Upvote 0 Downvote
I believe SW give a "out of memory" error when approaching the 1.6 barrier, was that the error you got or did you get exactly the message you stated? Might be obvious, but did you check your page file settings? I happend to me once, after I re-installed I forgot to set it... Stefan Hamminga Mesken BV 2005 Certified SolidWorks Professional Mechanical designer/AI student
Aug 19, 2005 Thread starter #9 Drhinehart Mechanical Apr 21, 2004 64 My systems are as follows: P4 3.0 ghz 2gb ram / 1gb ram Quadro 4 980 XGL Video 128mb / 6722 driver SW05 SP2 The difference between the two machines is the ram and the video card. But both machines have the same video driver version and video ram. Yes the error message is the "out of memory" Drawing file size is 32mb Upvote 0 Downvote
My systems are as follows: P4 3.0 ghz 2gb ram / 1gb ram Quadro 4 980 XGL Video 128mb / 6722 driver SW05 SP2 The difference between the two machines is the ram and the video card. But both machines have the same video driver version and video ram. Yes the error message is the "out of memory" Drawing file size is 32mb
Aug 19, 2005 #10 SBaugh Mechanical Mar 6, 2001 6,686 Try updating the driver, SW has a new approved driver. Also try running a "Modify" on your system - FAQ at my website. Regards, Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376 Upvote 0 Downvote
Try updating the driver, SW has a new approved driver. Also try running a "Modify" on your system - FAQ at my website. Regards, Scott Baugh, CSWP http://www.scottjbaugh.comfaq731-376
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")