Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3D model of 1-1/2" Shackle

Status
Not open for further replies.

metman

Materials
Joined
Feb 18, 2002
Messages
1,187
Location
US
I am trying to register with 3D content central but the confirmation has a bug.

Meanwhile does someone have access to a 3D model of a 1-1/2" lifting shackle? I would love to model it but I have already used up gobs of time researching Blodget's Design of Weldments -- very (too) intereting.

Design for RELIABILITY, manufacturability, and maintainability
 
CorBlimeyLimey,
Thanks for the link. Still could not download the 3D model but it is a nice image I am copying for making my own model.

Design for RELIABILITY, manufacturability, and maintainability
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top