3D curve projection on a plane in NX 1

[Sirius17]

Hello,
I would need to project some curves, drawn on a three-dimensional solid, on a plane/sheet keeping the curves lengths.
I know that with "project curve" it is possible to do the reverse path, that is, project a sketch on a solid while keeping the lengths in both x and y.
I use NX 1946 software.
Can anyone help me?

Thanks

 

[jerry1423]

are you working with a sticker or decal placed on a surface ?

Jerry J.
UGV5-NX1899

 

[JohnRBaker]

The Wrap and Unwarp, as well as the Flattening functions, can map 3D curves from a face/surface onto a plane. They can also do the reverse, map 2D curves back onto a face/surface.

Here are a couple of albeit old videos, but they should help point the way:

https://www.youtube.com/watch?v=ZObJhvJosTo

https://www.youtube.com/watch?v=RHNJqv4keOU

John R. Baker, P.E. (ret)
Irvine, CA
Siemens PLM:
UG/NX Museum:

The secret of life is not finding someone to live with
It's finding someone you can't live without