What is the proper procedure hydrotesting a 3-way ball valve. The valves have size range 1/4 IN to 6 IN and pressure upto 2500 psi. the end connections are Threaded NPT, Socket Weld, Butt Weld and Flanged ANSI. The test is per API 598. do we need special connections and fittings?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
3-Way Ball Valve
- Thread starter WAJDI
- Start date
Similar threads
