How do I apply the specifications of E1300 for laminated glass with 3 plies of glass and 2 interlayers? Can I simply add all layers together and use the equivalent minimum thickness as in 3.2.3.2 and extrapolate the values in Table 4? The design I'm checking uses 3-10mm plies with 2-1.52mm PVB interlayers.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
3-ply Laminated Glass in E1300
- Thread starter wishnias
- Start date
Similar threads
- Question
- Locked
- Question