Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
2nd repair to existing repair 1
- Thread starter grecca
- Start date
-
1
- #3
bernoullies123
Mechanical
Assuming D1.1, then refer to section 5.26. No specific limitations on the number of repairs. But 5.26.3 Engineer's Approval, will always be a tough one. Good practice would be to qualify the number of repairs (N) first to ensure the weld quality after the N times of repair is acceptable.
- Status
Similar threads
- Locked
- Question