Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2GB RAM usage limit

  • Thread starter Thread starter edo777
  • Start date Start date
E

edo777

Guest
Dear all,

I am running Creo on a 64 bit machine with 8GB RAM allocated.

It is the first time that I have to assemble a very large assembly (at least for my limited experience) and I notice that I have limited memory allocation, i.e. the software is occupying 2GB of memory and 6 GB are unused.

The software is sloppy and slow but the RAM is there ready to be taken.. Do you know any tricks to try to unlock this situation?

thanks in advance for your suggestions,
Edo
 
Go to Task Manager -> Process -> then Right Click on xtop.exe or You Creo Process File -> Go to Details -> then Click on Set affinity -> See How many processors are Use to Run your Program-> Click on all Processor Check Box to Utilizes your Maximum RAM.
 

Part and Inventory Search

Sponsor

Back
Top