2007 Toolbar and Icon Descriptions 2

[Russell67]

One of the new to the 3d world of designeers is wondering if there is a document that shows the icon followed by a brief description of the command that can be printed out for reference. I see that if i search for toolbar in the help section of solidworks it will list them out for me, however wondering if someone has already done the leg work. Thanks

 

[Eltron]

If you go to Tools / Customize / Keyboard Shortcuts you can print out a list there.

Dan

http://www.eltronresearch.com

Dan's Blog

 

[macduff]

I think if you hover over the icon it should tell you what it is.

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2008 SP 4.0
Dell 490 XP Pro SP 2
Xeon CPU 3.00 GHz 3.00 GB of RAM
nVida Quadro FX 3450 512 MB
3D Connexion-SpaceExplorer

 

[Russell67]

I mentioned to him about hovering over the icon and already printed out a list of the shortcuts. This guy is from the old school and likes to have printed material. Any other suggestions.

 

[macduff]

Dan,
That's awesome. never new that was there!

Russell67,
Did you see Dan's comment?

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2008 SP 4.0
Dell 490 XP Pro SP 2
Xeon CPU 3.00 GHz 3.00 GB of RAM
nVida Quadro FX 3450 512 MB
3D Connexion-SpaceExplorer

 

[Russell67]

Thanks macduff i guess reading is not my strong point. I forgot to uncheck the only shortcuts box. Thanks

 

[CorBlimeyLimey]

Take note though that different lists of commands are given when different modes (part, assy, drawing) are active.

 

[macduff]

Morning CBL, you rock!

Colin Fitzpatrick (aka Macduff)
Mechanical Designer
Solidworks 2008 SP 4.0
Dell 490 XP Pro SP 2
Xeon CPU 3.00 GHz 3.00 GB of RAM
nVida Quadro FX 3450 512 MB
3D Connexion-SpaceExplorer