180 VAC motor power supply?

[jamiewilson]

I had a researcher bring me a Bauer gear motor that calls for a 180VAC 1 phase supply. I was surprised at this voltage. Would it be possible to run it off of a 110, 120, 220, or 240 V supply without creating a problem? It has a small inverter control board with a little rheostat setup for controlling the speed. Any thouhts would be helpful!

 

[Barry1961]

You may be able to download the info you need here.

http://www.namc.danfoss.com/

They are hooked up with Bauer in the US.

Barry1961