Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

#1 Phillips Dimensions 1

Status
Not open for further replies.
craigmj

craigmj

Mechanical
Joined
Feb 5, 2006
Messages
37
Location
US
Does anyone have a line on standard dimensions for Phillips heads. I'm looking for a #1 right now, but a general guide would be nice.
Thanks
CJ
 
Sort by date Sort by votes
According to my Machinery's Handbook, the dimensions and gaging depths for english cross recesses of machine screws should be found in ANSI/ASME B18.6.3-1972, R1991
 
Upvote 0 Downvote
Kenneth,

Right on. Thanks for the info!

Craig
 
Upvote 0 Downvote
smah,

Does the ASME spec better than ISO 4757? Also, does it give dimensions for the screwdriver (ISO8764-1)?

Craig
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Question Question
Can you 12KW laser cut H-beam metal?
Replies
0
Views
6K
Bluces
B
S
  • Locked
  • Question Question
Turning a 410 S.S 15mm round bar to 12.7mm
Replies
6
Views
3K
Saman2002
S
DaPinci
  • Locked
  • Question Question
Help Determining Thread Fit (ISO 965-1)
Replies
4
Views
1K
DaPinci
DaPinci
Bmehrens97
  • Locked
  • Question Question
16ga Galvanized
Replies
1
Views
853
Shine-Choose
Shine-Choose
Radius1
  • Locked
  • Question Question
CNC Op 10 and Op 20
Replies
2
Views
2K
enginesrus
enginesrus

Part and Inventory Search

Sponsor

Back
Top