1/2 inch v-belt pully design

[rnoggin]

looking for a quick ref for pully design - groove angles and such for pulley to mount to a DOM shaft spindle. I'm cutting out of steel.


Thanks
rnoggin

 

[GearmanPE]

rnoggin;

Like everything else you ever need to know, it's in the Machinery Handbook, Industrial Press.

 

[Tyroneous]

You can also find all the information you need from the manufacturer of the belt you plan to use. Here is a link to a Dayco V-belt Design Guide, PDF download.

http://www.cptbelts.com/products/catalogs.html