Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
1.0038
- Thread starter andysf
- Start date
andysf,
S235 is a structural steel and it will be difficult to reproduce this grade in a regular foundry. The Si content specified is 0.05% max, and it will be difficult controlling the melt.
What part are you attempting to convert using this grade. Perhaps, that may fetch more meaningful responses.
I'm just one step away from being rich, all I need now is money.
( read somewhere on the internet)
S235 is a structural steel and it will be difficult to reproduce this grade in a regular foundry. The Si content specified is 0.05% max, and it will be difficult controlling the melt.
What part are you attempting to convert using this grade. Perhaps, that may fetch more meaningful responses.
I'm just one step away from being rich, all I need now is money.
( read somewhere on the internet)
- Thread starter
- #3
- Status