Well if someone wants to perpetuate and agenda. Then most likely they would add something to the oil spill to cause the fish kill.
Funny how no one worried about it during the big one WWII.
My mom told me about how she constantly saw the thick oil on the beaches of the east coast. From all the...
Depends on how the shafting is connected.
Like in automotive applications it isn't real critical due to the use of universal joints.
To lessen the power losses and wear, the closer the better.
Especially if it is a solid connection, if it isn't real close then something has to take up the...
I think most auto manufactures proof test their engines at
max rated HP for X amount of hours. To run full rated HP as continuous you would need a cooling system to handle it.
And most likely some other type of exhaust system.
Since there have been many automotive engines converted to...
Well I have like 60,000 to 70,000 on some brake pads and shoes that were only supposed to last 30,000 or so. And that is on the NONturned drums and rotors.
Also in my flying days, the small planes that I rented had rotors that were grooved and worn worse than anything you would want to use on...
I have found refferences on the net about how the EPA and State agencys had stopped worrying about emissions from Jet aircraft because for the 5 year period no headway in reducing them was insight.
I would like to see some figures on what types and what the quantities are of the various gases...
Its really pretty simple. Back in ole Henery Fords day, he had one old secretary that did everything. Book keeping,
payroll etc. Now most all big business keeps adding thousands of "non producers" that usually make more than the
worker in the factory. So there is a lot of non producing
over...
It isn't so much a practice how to use the buttons type of deal, when operating CNC machines. Its knowing how to use the work offsets, setting cutter comps etc. A good CNC book can explain that to you. All the various controls are different in how they accomplish the same task.
If you know how...
350 in lb ???? And its .5 inch diameter?
So that undercut area must be a very small diameter. I could not access the photos.
I would like to know what the torque requirements are for
the compressor and "various speeds"? What is the instantanious shock torque and full governed speed?
And...
I think that is one of the secrets in some racing engines.
I read some place that some stock car engine builders have been doing that for years. To compensate for different induction flow charateristics, and other cyl to cyl variables.
The major difference between and automatic transmission and a manual. Is the type of bearings used. Most manuals use frictionless bearings, ie ball bearings generally. And they will live much better with minimal lubrication. In the automatic, it has mostly plain type bearings or bushings. And...
I have used stainless steel studs, bolts, nuts many times in that sort of application. But not copper no strength in them. Just make sure you use a stainless that won't rust. As some species do.
I had something similar happen many years ago. So its all pretty foggy. There are 2 types of macros for Fanuc controls. I think it was type A and type B. And now its where I am in the fog. I can't remember which it is.
But for argument sake, say type "A" is what any Fanuc control can read with...
In past flying days. I knew of an airport that had something called a DF steer. "Direction Finding" any way
I guess it was a sort of passive radar. The pilot keyed his mic and the radio acted like a transponder of sorts and a line on the CRT would go to the plane. They used a map overlay over...
So what size and brand is that 5Mil engine?
Synthetic vs Mineral. I'm don't know, but what about spillage of one vs the other? And time use limits? Cost of course. I was at first thinking burning and by products from. But recycled motor oil is all dumped into the same container and then used...
"All the ones I have checked seem large and the numbers prove that the added weight is detriminal to the rest of the crank points."
Qouted from original post.
I'm a bit slow today. Weight is detriminal? I tried the dictionary on line and could not find what it meant.
Anyway if detrimental is...
H2O.
I think pollution is a state of mind.
What pollutes to someone does not pollute to someone else.
If it is "OIL" well left alone and not "mined"(drilled) for. It would as it still does, naturally bubble forth from the ground, and sea beds. And is even enjoyed as food for deep sea marine...
