Working with a sheet metal folding machine that folds a part on average every 35 seconds. The problum is how to stack palletise and move product out of the way after dark with no opperator. some way to move pallets into postion fill them and move them out, stack and load more pallets. any imput...
wblock will also do the job. just type wblock then select the info you want, then a point of origan. it will save to a wblock directory.
when you need it just type insert, the wblock pull down appears, you select the one you want, place it where you need it, at this point you can resize, rotate...
First set your title sheet (.dwt) file so you have your drawing requirements pre-set for all drawings, line weight, dim style, tolerancing, text font and size. Build your title block w/bill of materials, Company name logo everything you need. you can add layers for dimensioning,line types...
Estassoc
Apperently my syntex is wrong then, what you recomand is just what I did.
When I input the values it gave me an error message "Point or option key required". What I want is @1460.6'<N89d43;56"W
Can you offer anything ferther?
The @distance<direction is the easy way to do this type of task. The explanation to this is the @ sign starts the function then the length of line is next then< serves as the direction. example @4<30 give you a line 4" long at 30 deg. your next line would be a length then <120 deg. giving...
Autocad 2000, How can I use the line function @distance<direction with survey units such as N 89d43'56"W and get the line distance and direction I need?
Thanks for your help
hi
use one round pin and a diamond pin to locate the part to be tested preferable at oppsit ends of the part then bore holes in the fixture exactly where the the rest of the holes should be, then make sliding pins with the ends turned down to the sum of the mmc of the hole and the location...
You are all close but the real problem is the true position of the holes, no two holes are exactly the same distanct apart. The round pin locates the primary hole in both axes and the diamond pin locates the perpindicular axes of the secondary hole alowing for some devation in the location of...
Woodsoftheworld.com has a very good site that has information on nearly every wood you can imagin, Form cutting, screwing, drilling, and most of all the health hazzards. the only thing I have not found is the Maple spour deases that I have contracted, that cost me a lung opperation and the need...
How many leads do you need? How many amps? the connector i refered to can come with or without threads, they slid together with little force and are keyed for alignment. I was segesting a idea to see if it was along the line of what you are looking for. Do you have a design yet?
Thread form is my first guss as well, but one other thing did you use any dry lube? and have you sectioned a piece to look at the cross section? I would like to see the cross section photo for analysis this could tell the story.
usaidit
Not having much information to go on regarding your need, I would offer that you might want to look into mil spec. 5015 cylinderical connectors, they can be hard mpunted, If you want to provide more information I may be of more help
USAIDIT
I have no knowledge regarding your search, except that the Hobert site has some very helpfull people, they have helped me when my robot vendor could not, give them a try.
Just a personel preferance but I find inside autocad my favorite, but as anyone will tell you what you find easy to work with is best for you. Do you have a college libary near you? if so check out all the books you can and try them all befor you buy any.
Your discription of the task leaves me guessing.
Is the lid hinged and you simply need to stop the basket accuratly?
Is the lid unatached and not relivent to the basket location?
If you will provide more information we will be glad to help.
TVP is right on target.
Only one thing he left out, is the fact that anodized alum is now a non-conductor of electrical curent if that is a factor in your application.
