I am in the process of creating a test rig that involves an alternator and a motor. The rig is driven by an 8 ribbed multi-vee belt (serpentine) the same kind that is on every car in North America.
The drive pulley is in the 8" range and will be held on the drive shaft with a taper lock hub...
Mr. Vaporware is correct.
I am working on a project in Canada for the U.S.M.C. and i am unable to have models released to me because i am outside the U.S.
Hence my problem!!!!!!!!!!!
I have a HMMWV sitting out in the parking lot. My problem is that i need to create a drawing showing the...
thanx guys,
maybe i should have worded the description better.
i need a PARAMETRIC 3d SOLID, (solidworks, solidedge, inventor, etc.) not a 3d model for gaming.
if you are modifying a block in a drawing....
insert the block somewhere else in the drawing, put a line or point at the "ins" (insert) of the block. recall the name exactly and explode and modify the block. re-block with the same name and the same insert point. - all blocks with...
this item can only be made from separate panels and welded together.
Without a formula, the entire inventor model will need to be re-checked and modified for even the simplest change each time.
I am looking for a formula for compound angles on different planes. Again, say the joint in the x-y...
I'm sure there must be a formula for calculating the cut angle for each side of a box with a tapered bottom. Eg.- In the top view the angle between the two pieces is 30deg, in the front view the angle is 45 degrees on same joint. Q. How do i calculate actual cut angles without actually...
Could someone let me know if there is an online resource that can give me a better idea of the components and operation involved in using a swash plate.
i intend to assemble two parts positioned inline with each other with a series of pins on a swash plate that will press the pieces together on...
i have to agree with all the people that said " ask the machinist" for a variety of reasons, 1> The machines at your plant may only be capable of certain operations, the machinist knows these and can help you design within "on-site" parameters, other designs will have to be...
i'm not sure about the grains....but, the rest of the items can be sorted in a vibrator bowl.
this tooled bowl will sort out the good from the bad, and may be able to be used for more that one product, but, these are really meant for a dedicated part, and it sounds like you have a multitude of...
