Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mmauldin

    Convert components from an assembly into one single part.......

    You can create non-assiciative linked bodies, then delete the components.
  2. mmauldin

    Distance constraint incompatible with cylindrical

    I would try locating a point on the center of the distal stem, then align that point with a datum plane set 5mm + the radius of the stem above the green surface, Simpler math for NX and it won't go negative.
  3. mmauldin

    NX 2212: Subtraction error.......

    Check your sketch. I created a sketch with 3 circles (2 identical) and extruded the feature curves. I got 2 solids from one extrude. Maybe the sheet body comes from an almost complete full arc.
  4. mmauldin

    NX 2212 - Sheets from curves..............

    You would need to recreate the Pattern Geometry but with associativity turned off.
  5. mmauldin

    NX 2212 - Sheets from curves..............

    Zip attached.
  6. mmauldin

    NX 2212 - Sheets from curves..............

    No need to enlarge the bounded planes, Face Blend will span the gaps:
  7. mmauldin

    NX2312 Swept twisting issue

    You can break the section curves down to 2 curves instead of one, i.e. 2 arcs instead of a circle.
  8. mmauldin

    Dialog Boxes, Pausing randomly

    It doesn't happen on exiting the dialogue box, but it seems like the measurement function does lock up my computer for a minute or so maybe 10% of the time. Haven't really noticed any other hang ups. NX1953.
  9. mmauldin

    New Sketcher vs the old Sketcher

    I will cling to the old sketcher as long as possible, then probably retire. I've been a NX fanboy for decades, not so much with the new sketcher.
  10. mmauldin

    Using if expressions for creating law curves

    Looks like it works.
  11. mmauldin

    Using if expressions for creating law curves

    In the camber line equation in pic #3, what do p, t, m, and c represent?
  12. mmauldin

    CENTERLINE FROM A TUBE BODY

    Actually, Isoparametric does work, I just forgot to set it for U and V.
  13. mmauldin

    CENTERLINE FROM A TUBE BODY

    I used the edges to create a ruled sheet body but isoparametric curves didn't work. Instead, I used Offset in Face to offset one edge of the ruled body half the face width, then created a tube that essentially matches your original. Part file also attached.
  14. mmauldin

    CENTERLINE FROM A TUBE BODY

    I downloaded a STEP file of a spring and used the ruled surface/isoparametric curve approach to recreate the centerline. I used the isoparametric curve to recreate the tube and it seems to work. I tried to create a Tube Centerline using both faces of the tube but it failed. Tube Centerline does...
  15. mmauldin

    CENTERLINE FROM A TUBE BODY

    Tried to open the file but found no geometry. 2.2KB is pretty small for a STEP file.
  16. mmauldin

    CENTERLINE FROM A TUBE BODY

    Does the edge that runs lengthwise on the tube have a diametrically opposed counterpart? If it does, it might be worth a shot to create a ruled surface between them then create an isoparametric curve on that surface to determine the centerline.
  17. mmauldin

    hello everyone, can you help me how

    You could try Synchronous Modeling "Offset Region" and select all the faces except the blends into the main body.
  18. mmauldin

    Creating wire fencing using NX

    Another version.https://files.engineering.com/getfile.aspx?folder=7fe4612e-f5d6-45bf-84f8-200808c2f889&file=wire_panel_2.prt
  19. mmauldin

    Creating wire fencing using NX

    Sounded interesting so I built this. You can use length and width to make an oversize panel and trim to size.https://files.engineering.com/getfile.aspx?folder=e4a7a12d-f0f4-4a2d-acec-967c80132282&file=wire_panel_1.prt
  20. mmauldin

    Can this be done in NX? And if so, how?

    I need to maintain contact between the two blue surfaces and the yellow surface as the green component is rotated/translated. I've tried multiple combinations of touch/align/angle but it always ends up either being outright over-constrained or prevents dynamic movement. I would like the...

Part and Inventory Search

Back
Top