Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. KooKoo

    "Generic Naming graph Error"

    I suggest logging a PMR. This error message is as common as Command interrupted.
  2. KooKoo

    Hatching problem?

    Have you tried decreasing the spacing?
  3. KooKoo

    Is Static Analysis applicable to Functional Molded Part?

    I tried that but once in the GPS workbench CATIA sees the split surfaces as individual surfaces (not joined). In the first example I tried I took a rectangular surface and split a circle in the center (without using the Datum icon). When meshing I had to mesh each surface individually. Next I...
  4. KooKoo

    Is Static Analysis applicable to Functional Molded Part?

    If I understand you correctly you can't apply boundary conditions because when you try to add loads, or restraints or .... the whole surface\volume gets pick. Or am I totally of? Try splitting the surface into areas where you want to apply your BCs. When you do the Split, select the Datum icon...
  5. KooKoo

    Splitting a part...

    Try the Reflect Line. This will create the parting line. You can construct your parting surface from this curve.
  6. KooKoo

    Linking a text box on a drawing to a prameter

    Try this thread http://www.eng-tips.com/viewthread.cfm?qid=92712
  7. KooKoo

    Record Macro CATIA V5 R15

    Do you mean when you record the macro then go back to edit the script all you have is Sub and End Sub? I get that often even outside of FreeStyle.
  8. KooKoo

    Aligned Sections on drawings

    What I meant was sketching the lines first using the Line or Profile icon, constrain them using Geometrical Constraints or Driving Dimensions then "tracing" over them when creating the section line. Use the right mouse button for additional options when sketching the section line.
  9. KooKoo

    Keep link

    Creating the circular reference (in Pro/E anyways) is no problem. Sometimes they can get created without intending to. I ran into this a lot using Pro/MOLD. I found the models I worked with that had circular references were unstable. PTC always told us to fix them.
  10. KooKoo

    Aligned Sections on drawings

    What about creating your part drawing section lines as sketched lines in the drawing instead of the part?
  11. KooKoo

    Dump parameter values

    Do know much about VB but my best guess is the CATScript file it creates can be modified to run and change the desired settings (instead of going to Tools, Options to do it). This can be useful if you change settings often. No need to go to Tools, Options just run the script.
  12. KooKoo

    Sweeping and changing cross-sections.

    May also be able to use a Multi-section solid\surface.
  13. KooKoo

    CATIA V5R13 MAKING A WELDMENT ASSEMBLY FOR MACHINING

    Here's a related post: http://www.eng-tips.com/viewthread.cfm?qid=89597
  14. KooKoo

    Drafting V5 R14, dimension properties

    You said it "Standards". Check this site for related posts (setting up drafting standard, admin mode.......) Also have a look at the documentation.
  15. KooKoo

    Drafting: Adding funnel to dims.

    The link below takes you to IBM PLM Support. https://www-304.ibm.com/jct03004c/software/applications/plm/support/support.wss You can search for stuff under Self help or submit defects under Problem submission. Sorry couldn’t be more help, we’re not on R15.
  16. KooKoo

    Batch Analysis Catia v5 automatically with input file??

    Have you tried using the AnalysisUpdateBatch from the Batch Management? (Start/Programs/CATIA/Tools/Batch Management)
  17. KooKoo

    Dynamic Analysis

    Have a look here: http://www.sdcpublications.com/catalog.htm#FEA-CATIA When you bring an assy into GAS you need to covert the assy constraints to analysis connections or create the connections manually. CATIA needs to know how the parts interact.
  18. KooKoo

    Catia v5 static analysis color palette

    The first thing that comes to mind is the "color palette" may have been dragged off the screen. You can try dragging it back (while in the results view pick the axis on the bottom right hand corner of the CATIA window, this will dim your 3D model and activate your color palette for zooming and...
  19. KooKoo

    Catia V5 on Acer aspire 3000, the screen is freezing!!

    To turn off the tooltips go to the Options tab under Tools, Customize. For an older version you can check with your VAR or IBM.
  20. KooKoo

    Catia V5 on Acer aspire 3000, the screen is freezing!!

    Have you tried turning off the tooltips?

Part and Inventory Search

Back
Top