I've got a situation where someone created a project length Proposed Right-Of-Way file and from that, offset the Limit Of Disturbance line. I need to create shapes between the two lines (per property) .... usually a piece of cake task, right? Well, it turns out that all these lines are...
Roader,
I'm not working in V8 yet. I can tell you how to station a baseline using Microstation J and perhaps it's the same in V8.
On your Main menu, pull out the strip below your fence command and go to the block on the far right hand side. This command is Construct Active Pnt @ Dist Along...
When I start a new project, we usually receive some dgn's from our client (most times this is SHA). This is most likely the existing topo file. I check the working units and the global origin to make sure it follows SHA standards. Then you can do a "save as", call it seed2d.dgn (for...
Next time you attach a cell library and there are none showing, go to File, and then hit Compress (in the Cell Library box). This should bring them all back.
When you bring up your Oce Plot Director, you will notice tabs on the right hand side. Click on the "Media" tab. It should say "AutoRoll" in the box under Paper feed. If you click on the arrow tab next to it, you should see "Roll 1" and "Roll 2". This is...
