Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. GTrinh97

    Splice Connection

    @SethGuthrie Yes, please! Thank you so much for that.
  2. GTrinh97

    Splice Connection

    Yes ! It will be a flange-plate connection for moments along with shear plate.
  3. GTrinh97

    Splice Connection

    I am working on designing a bolted beam splice connection for a W-Beam, with the splice located at one-third of the beam's length. However, after reviewing the AISC Steel Construction Manual (15th Edition, Volume 1), I was unable to find an example that specifically addresses this type of...
  4. GTrinh97

    Risa 3D Steel - Concrete Column

    Hi EngDM, That's great advice! I'll definitely consider that. Hi JoshPlumSE, All the information you shared is perfect for me to start. I will give it a try and let you all know my solution! Thanks!
  5. GTrinh97

    Risa 3D Steel - Concrete Column

    Hi JoshPlumSE and EngDM, Thank you for your help! I am working on designing for increased capacity. Do you have any example problems that I can refer to?
  6. GTrinh97

    Risa 3D Steel - Concrete Column

    Hi everyone, I have a question about designing a composite column with HSS infilled with concrete. I'm not quite sure how to approach this in RISA-3D. Does anyone have any suggestions or guidance on how to get started? Thanks in...
  7. GTrinh97

    Bar Metal Grating

    I am looking for the dead load of this grating to design the structure below. I haven't been able to find any resources for this specific size of grating. Grating (field note): 1. Width: 5' - 7 1/2" 2. Span: 26' - 3/8" 3. Bearing Bar Depth: 5 1/2" 4. Bearing Bar Thickness: 1/4" 5. Bearing Bar...
  8. GTrinh97

    ASCE 7-16 -c&C Roof

    Should I treat it as flat roof or gable/hip < 7 degree? https://files.engineering.com/getfile.aspx?folder=8eb38e2c-bd85-4dd6-b02f-ab7509b9f38a&file=Screenshot_2024-06-19_115819.png
  9. GTrinh97

    Splice Beam

    @SWComposites (Aerospace) There are cutting section BB showing the exist. beam (gray color) and new beam (black color)
  10. GTrinh97

    Splice Beam

    I am looking for similar method of securing metal to wood, but the contractor prefers using Simpson Strong-Tie products. The Simpson ties available are typically designed for either compression or tension, but my design needs to handle...
  11. GTrinh97

    Screws and Nails

    Any screw that can go from the steel plate first then go through the wood beam? https://files.engineering.com/getfile.aspx?folder=f564f4de-4827-44d8-ab7c-f3bad36eb37d&file=Screenshot_2024-05-28_131540.png

Part and Inventory Search