Search results for query: *

Hi, I have a display problem when I create a section in modelling. Especially if the section is made on an assembly. For some reason the cap color is displayed through objects not in the section (See picture) The cap color is shown especially where there are blends and holes in the geometry...

okey. So you are generating the PDF through a Workflow in Teamcenter right? Then it is a little bit more complicated. I suggest that you contact your Teamcenter Administrator or the person responsible for the workflows.

Hi, Have you tried to change the image resolution setting to High? You can change it under Settings in the Export PDF Dialog Box. https://res.cloudinary.com/engineering-com/image/upload/v1456209594/tips/exportPDF_cnvapn.tiff

Hi, Go to Preferences Tab-->Selection and turn off Highlight Selection on Rollover.

With NX viewer you can export in Parasolid (.xt) format. And I am quite sure that MasterCam can read Parasolid format.

Hi, My guess is that the view has been made to Independent detail view.

Hi, In Customer Defaults there is a setting that creates stock as components. Search for "Stock as components" in Customer Defaults.

At least in NX 8.5 when you right-click a views border and go to View dependent Edit you are able to change the translucency of shaded objects that also will be shown when exported to PDF.

Yes indeed. I dont see any benefits of exporting a NX drawing with the wrong scale? Hopefully we will see an option where you can set the scale in the DWG/DXF wizard soon.

Hi, Is it possible to export a NX drawing to DWG in Scale 1:1? I can only get the dwg in the scale that the views in the NX drawing are created. This is a big problem because the measurements taken in the DWG are incorrect because the views are not in 1:1 scale. Example: if Views are created...

Also make sure you have the model fully loaded. (Use lightweight representations off when loading part/assembly)

Right-click on the detail view and select Convert to Independent Detail. After that you will be able to Activate sketch and sketch in a detail view.

You will find the under Type=Geometry. Try to hide that type.

Hi, Press Ctrl+W. There you will be able to hide Coordinate systems, Datum Planes etc.

With NX Viewer you have the same measure capabilities as with a "Normal" NX CAD license. You can open up NX parts but also parasolids with NX Viewer.

Hi jerry1423, I don not think it´s my computer who is to slow.. I use a Dell precision M4800 with Intel(R)Core(TM) i7-4700MQ CPU @2.40GHz Graphic Card: NVIDIA Quadro K2100M Installed Memory RAM 16GB. Our previous CAD system was not struggling at all with same kind of shaded views so i just...

The use of shaded views is important for us in this kind of drawings. It contains of very many small components that would almost be impossible to separate if it would be done with wireframe views. So visually it would be a huge benefit to get drawings like these with shaded views. What is...

Hi, I have created a drawing of an assembly. The assembly contains of about 3000 components so it is quite big. I have created 5 shaded views of the assembly. My question is when I print/create a PDF it takes a very long time before NX actually print/create PDF of drawing. I get a message...

Hi, I have trouble creating the routing bill of material on a drawing sheet. In 3D space I´m able to create it but not on a drawing. Reading the NX help i was able to find the following instructions: To access the Bill of Materials (BOM) system interface, choose the BOM System Interface...

Thank you!