Snag-it is another good one to try. I'll have to look into Capture Wiz Pro
Thanks,
John, CSWP
CAD will not make better designers; it will only make poor designers faster...
Anyone out there having any issues with Release 2 of Server 2003 service pack 2 ?? Currently this is what SW has to say about it:
As of January 31st, 2007, the testing of SolidWorks products on Windows Server 2003 R2 was still in process. Therefore at this time the performance of SolidWorks...
Woolly,
Also note that with a large vault, the more you use Projects in your vault the faster PDM Workgroup will work access the vault data. This is recommended in most of the documentation.
John
Certified SolidWork Professional
CAD will not make better designers; it will only make poor...
problem solved guys. Can't believe I didn't think of this one, I must be slippin'. Pdf options "embed font" was unchecked. The user having the problem unchecked it for some reason or another. So much for big problem. We have alot of users here, many with little to no experience before...
nope, just plain old drawings. Doesn't matter it they are simple or complicated, all the text goes nuts. The lines seem to be okay.
Certified SolidWork Professional
CAD will not make better designers; it will only make poor designers faster...
Has anyone else had a problem with opening pdfs generated from SolidWorks with programs other than Adobe? We have Myriad and AutoVue here, and both have a major issue opening these pdfs, but Adobe is fine. AutoVue is set to be our systems main viewing software and markup utility.
Anyone else...
a jpeg image is nothing more than a compressed bitmap (roughly 1/10th in compression). Don't forget SW2007 has a screen capture funtion now that works like Alt+print screen only you don't get the whole window, just the viewport.
Certified SolidWork Professional
CAD will not make better...
only problem with all that guys, is it's cumbersome. I used to use an OLE word file for our notes, but for what it does with numbering and formatting, is downsided by the inherent problems with OLE images. Sizing, size limitations, translation to other data formats. Hit them up with...
I noticed this after having two vaults, or changing where the vault was. After updating to SP3.1 it's back to normal.
don't know, but I've seen it also.
Try turning off the Addin, exit out of solidworks, then start back up and turn the addin back on.
Certified SolidWork Professional
CAD...
no biggie, hard to get emotion across without alot of text.
Certified SolidWork Professional
CAD will not make better designers; it will only make poor designers faster...
cor,
sorry if you took it that way. I was really refering to internally here. It's a complete flux though, somedays are worse than others. For most part it's okay, but these type of senseless arguements with IT are not needed, for a guideline that SolidWorks and other companies use.
I've...
Cor,
I was planning on using the search yesterday, but it was under maintenance. And I was frustrated enough, that I had to start the thread. It's tough, when people that know it all, don't....go figure?
Thanks,
J
Certified SolidWork Professional
CAD will not make better designers; it will...
I know, and even if you don't believe it, the effort required to stop the service before install/upgrade is about 15 seconds. So, it shouldn't even be an arguement.
Listen to them, always shut it off!
Thanks,
John
Certified SolidWork Professional
CAD will not make better designers; it will...
I just took the exam last week and passed with a 91%. You need 80% for a customer, the VARs need 90%. The exam is also going into an overhaul this summer I hear, not sure exactly how it will change.
Onto the benefits to the company. If you're like me, it adds some credibility when you have...
Anyone having any real life stories about NOT turning off the anti virus and installing without any problems? I'm discussing this matter, due to the fact we are seeing all sorts of bizarre little problems since updating to 2007, and IT did not turn off the Anti-Virus. I'm tired of arguing the...
So from 2005 to 2006 they recommended uninstalling SW and installing 06 new. It seems the same for 07? Has anyone had any problems just upgrading? What's everyone seeing? I had some toolbox issues when I did the uninstall/reinstall from 05 to 06.
I will be needing to upgrade soon, as the...
security is not an issue at the moment. Long standing relationship with the contractor. The contractor(s) would be onsite when accessing the vault, and they would have their own copy of Solidworks & PDM works, which they would like to implement at their own facility. Biggest hiccup is keeping...
I'm the lone ranger here, and coming from a long history with PDM works, installed it at the company, even though I'm the only user (revision control is a no brainer). My question, or rather poll is has anyone else dealt with having outside contractors using Solidworks, and trying to get them...
I've had the same trouble with assemblies with multiply configs. Sounds like a buffer error, where solidworks isn't releasing buffer memory. Sometimes closing windows helps, but not all the time. I've seen this type of issue over the years, but this one seems a little more elusive, the...
