yogeshpandyaster
Aerospace
- Jun 3, 2025
- 1
I am looking for acceptance and Rejection criteria for SS tube ID borescope inspection images.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Acceptance and Rejection criteria for botescope images
- Thread starter yogeshpandyaster
- Start date
SWComposites
Aerospace
Is there not a material or product standard that defines acceptable defects/indications?
'SS Tube ID'???
Rigid Borescope or flexible?
Is this a new requirement [no defined visual parameters/] or current inspection requirement?
Never forget that borescope examination is simply visual inspection using a borescope. What would be unacceptable for a visual inspection is likewise unacceptable thru borescope examination.
Rigid Borescope or flexible?
Is this a new requirement [no defined visual parameters/] or current inspection requirement?
Never forget that borescope examination is simply visual inspection using a borescope. What would be unacceptable for a visual inspection is likewise unacceptable thru borescope examination.
Last edited:
Similar threads
- Question
- Locked
- Question
