Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
AWWA Seismic design
- Thread starter sdz
- Start date
"Maximum operating level (MOL): The specified maximum water level under normal operating conditions. The MOL shall be taken as he MWL unless otherwise specified.
"Maximum water level (MWL): The water level defined by the lip of the overflow or weir unless otherwise specified."
These definitions are from AWWA D100-21 (welded tank standard), but I assume are the same as D103. This is in Section 1.2, Definitions, in D100-21.
"Maximum water level (MWL): The water level defined by the lip of the overflow or weir unless otherwise specified."
These definitions are from AWWA D100-21 (welded tank standard), but I assume are the same as D103. This is in Section 1.2, Definitions, in D100-21.
- Status
Similar threads
