mixing water with compressed to make spray

Greg80 · May 16, 2008

Hello,

Can I mix water with compressed air (both at the same pressure) together in 1 pipe by a normal T to make a spray flow ?
as follows :

water -------------------
-
-
-------------spray----------------------- to Nozzle
-
-
-
Comp. air ---------------

Can I do that ? If yes how can I size the spray pipe ?

Thanks

budt · May 16, 2008

Define "spray"

Bud Trinkel, Fluid Power Consultant
HYDRA-PNEU CONSULTING

Greg80 · May 16, 2008

Thanks for your reply

There is a nozzle installed in a vessel.
We need to feed "spray" to this nozzle .
Spray : compressed air + water (I don't have the mixing ratio now).
But I like to know is it right to mix water & air by this way or there are other methods for this type of mixing?

Newmanite · May 16, 2008

Sure can have been doing it for years.you can actually buy spray nozzles to do this job but think the water is at a lower pressure so it can be picked up in a venturi type effect,alternatively you can "mix" right at the valve if you like.Agricultural hardware shops have stainless steel sprayers go check em out.

13thzodiac · May 20, 2008

YOU CAN GET SPRAY NOZZLES WHICH HAS COMPRESSED AIR CONNECTION AND ONE CONNECTION TO THE LIQUID YOU WANT TO SPRAY. THE SPRAY CAN BE REGULATED BY ADJUSTING PRESSURE ON COMPRESSED AIR INLET OR PRESSURE ON LIQUID INLET TO THE NOZZLE. ITS SIMPLE PROCESS.

hydtools · May 20, 2008

Like a paint gun or air brush.

Or:

http://www.spraynozzles.co.in/air_atomizing_spray_nozzles .html

Or:

http://www.spray.com/products/air_atomizing.asp

Ted

Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

mixing water with compressed to make spray

Greg80

Mechanical

budt

Industrial

Greg80

Mechanical

Newmanite

Mining

13thzodiac

Chemical

hydtools

Mechanical

Similar threads

Part and Inventory Search

Sponsor