Maybe "View Dependent Edit" can help you, it's only available in drafting, look for "Edit Shaded Objects"
But you need a additionale view...
Switch in Drafting to the model views, you can use "Display Sheet OFF"
best regards!
Please report this problem to siemens we got a solution for a similar problem in NX1953.
Keyword copy constraints in pattern component...
or if you have an old part (NX10) with pattern component you can import it and replace the component in the pattern component.
Best regards!
@plach
We had the same problem in NX8 native no TC,
if the Assy. Load Options were set to "From Search Folder".
With "As Saved" we did not have the problem.
Best regards! [wink]
@RSilva [dazed]
I know it’s very tricky, but you can create a 2D Centerline in Drafting.
With the following settings:
gap=0
dash=longer as the longest spline
extension=0
Then export/import cgm from the centerline and you get the middle spline.
Best regards
[wink]
Hello ;)
Please set the following variables in your ugii_env_file
UGII_SDI_HPGL1_REVERT=1
UGII_SDI_HPGL2_REVERT=1
I hope these variables should solve the problem with the arcs.
Best regards from Austria!
Hi Riechi,
You can flip the dimension text to use the function "Edit/ Move Object" select the text and then use “Rotate about ZC axis” and turn it with 180 degree.
But it’s an illegal method you will not find it in the doku…
@Walterke;)
we export our Drawings always with 2D Exchange
and the settings are:
Output to: Drafting
Output As: DWG File
Then in ACAD you get a layout similar to the NX DWG and the geometry is in scale in the model area.
best regards
Thanks for your help, yes I use the same way to clean up the parts.
But now I have found, if I do the part cleanup in NX8 it works 100%, but in NX7 I always see also the old componend names.
It seems it's a bug in NX7.
@all
Also a question about “Save As" + deleting old named part
We are also working in Native Mode and often we have the problem, when opening an assembly part with several changes, after opening and looking for pull down Menu “Information/ Part/ Loaded Parts” we can see old Components with the...
Why NXOpen?
maybe this can also helpfull
turn on the new NX6 Hole Table creation in drafting
set the variable UGII_DRAFTING_HOLE_TABLE=1
Then you can use "Insert/Table/ Hole Table..."
best regards!
Hallo;-)
When I create a „Simple Hole“ + “Symbolic Thread” for a Whitworth Thread for example I get this result “G1<R1!4>” for the dimension text.
When I using the new “Threaded Hole” I missing the “G” character --> the result is only “1<R1!4>”
I’ve tried to add the “G” in the table...
