Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by swallow

  1. swallow

    Is this standard business practice?

    This is definitely not "standard" industry practice. I'm using ABAQUS for years and I haven't experienced something like this. ABAQUS is at least as powerful as ANSYS. I don't know of any conversion utility from ANSYS to ABAQUS. The best would be to talk with the people from the next...
  2. swallow

    Some questions in relation to Femap 8.2

    Hi StructuralGenius I don't know how to attach a file in this forum. But you can send a NEUTRAL-file to femap@bluemail.ch. I'll have a quick look. Rudolf
  3. swallow

    Some questions in relation to Femap 8.2

    Can't really help you with the error message, since I'm using ABAQUS as solver. But there may be a problem with boundary conditions that do not sufficiently constrain your model. To write results into a file you can use the command List/Output/Unformatted (or Formatted, what ever you prefer)...
  4. swallow

    Problem creating data files in ABAQUS/Explicit user subroutine VUMAT

    Hi Wim I don't know an answer to your problem, but is the compiler you are using supported by ABAQUS? I think this is a question for your local ABAQUS office in Huizen. Best regards, Rudolf
  5. swallow

    Result in different layers?

    *ELEMENT OUTPUT 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 S,E This will give the stresses and strains for the section points 1 to 15 (see ABAQUS Keywords Manual page 5.8-1). For the numbering of the section points refer to the ABAQUS/Standard User's Manual, Section 15.6.5. This is how you can write...
  6. swallow

    Result in different layers?

    Hi Pablo What you need are the different section points of the cross section. In your SHELL SECTION definition you have chosen 3 integration points per layer. So you will find 15 section points for which you can plot the results in the ABAQUS/Viewer. To identify the section points on which...
  7. swallow

    ABAQUS licensing

    Thanks Brad, thanks Mikey for your answers. I'll have a talk with my local ABAQUS representative about this. Rudolf
  8. swallow

    ABAQUS licensing

    Is it possible to access the ABAQUS license server through the internet? The computer, on which the license server is running, is in my office. Sometimes it would be very usefull to quickly run a small ABAQUS job on my computer at home. Thanks for your answers! Rudolf
See more

Part and Inventory Search

Back
Top