Recent content by suelflow

I'm going to try and make it...

All I can do is drop the decimals, not change the whole numbers.

I have a drawing where the primary dimension is in feet and inches but I need to have a duel dimension in millimeters rounded to the nearest 5. That is 5 or 0 in whole numbers not decimals; i.e. 32’-6” = 9906mm rounds to 9905mm.

Is there a definitive list of equations (with explanations for non-programmers) somewhere? I know that you can use some VBA but not all.

There is a write-up here... http://feeds.feedburner.com/swhblog http://feeds.feedburner.com/swhblog

You don’t insert the eDrawings file; you insert the controller via the developer tool (see above). Then you right click the frame and select “Properties”. Here you can point to the file name (FileName) and you also need to set the interface options (EnableFeatures). I removed my eDrawing from...

No the file is O.K., it was how I was inserting it. You cannot just insert the file (as an object), rather you need to insert the eDrawings controller, then point to the file under its properties (RMB). The hard part is finding how to insert the controller. You have to show the “Developer”...

I’m trying to insert an eDrawing (2009) into a PowerPoint (2007) presentation and it shows up as a static picture. While editing the slides I can rotate and zoom but in the slideshow it is just static. When I insert it I can no longer insert the controller (then point to the file in the...

I’ve used a series of assembly cuts to illustrate the assembly sequence of a sub-assembly. I have a configuration for each step with the cuts being un-suppressed. I had to do it this way because several of the “parts” are really areas of one solid body. When I go to animate it the assembly...

I think I got it figured out, we have a network install and the SNL Manager is installed on the server in IT. That’s why I could not find it in my Add/Remove Programs list. I’ll do the SolidWorks upgrade on my machine and IT will upgrade the SNL Manager. BTW – We only have 2 seats and are...

Yea, it’s at step 2 where I get tripped up. Do I use “Add/Remove Programs” (Windows) to uninstall then “Check for Updates” to install the new version?

Is anyone having issues with the network version of 2009. I’m a bit confused about the un/install of the SNL Manager…

The part is newer than the assembly.

What about the mates? Just let it float and define the sketches?

Matt Lombard has one here although I’ve never used it… http://mysite.verizon.net/mjlombard/