Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by SDETERS

  1. SDETERS

    Exploded view from several assemblies to a single drawing file

    Have you looked into using Arrangements vs exploded states?
  2. SDETERS

    I-Deas .xpk

    Yes, we still use CMM, in Teamcenter for older legacy parts. We are on Teamcenter 13.2 . I just reviewed that Siemens has a CMM for NX2412. Thanks
  3. SDETERS

    How to create Radial Section Cut on NX Drawing

    Here is a very basic video. When you right click on your toolbar go to customization. Search for Section. Section View (Legacy) should show up.
  4. SDETERS

    How to create Radial Section Cut on NX Drawing

    Ok Thanks, You could look for a command called "legacy Section" and try to create this view in a model view. But, I do not think this will work without having the PMI License, but you could try. If this works, you could create this "curve section" and then process this view down into your 2D...
  5. SDETERS

    NX Drafting : Impossible to use "I" as label

    You will need to reload your Changes into your 2D drawing. Try going to Menu Preferences, and drafting. Reload the Customer defaults, since you made this change. Then try creating your view.
  6. SDETERS

    How to create Radial Section Cut on NX Drawing

    Do you have the PMI license in NX>?
  7. SDETERS

    UDF library write permissions

    Browse to these locations, these locations maybe write protected. These are usually read only.
  8. SDETERS

    Model Items Selectable in Drafting View?

    If you double-click the view and go to "Common" "Configuration." is 'Snap Shot' under the lock method turned on? Just a quick thought on this.
  9. SDETERS

    NX2312 Sketcher and Drafting - Approximate Dimension Symbol

    That is a nice way of saying it, ha. I am glad this worked. I do not think they have this as robust as it should be. Have a good weekend!
  10. SDETERS

    NX2312 Sketcher and Drafting - Approximate Dimension Symbol

    After you finish your sketch, grab the dimension and move it a bit.
  11. SDETERS

    NX X.....................

    There is a session at Realize Live this year. We will be sending two people this year, for the first time in 15 years. Any ways please see the Below Link, maybe something you could be interested in attending. Thanks...
  12. SDETERS

    composite tolerance at lmc : is it nonsense?

    "We apply Least Material Condition (LMC) to castings to provide the supplier with additional tolerance for bores that require machining. Since our priority is Maximum Material Condition (MMC) to avoid non-cleanup on bores, a smaller bore ensures more cleanup. Therefore, we allow the position to...
  13. SDETERS

    Through Curves command

    Try turning on preserve shape. This may help a small bit.
  14. SDETERS

    NX 2212: Subtraction error.......

    It almost looks like you have two solid bodies. Try using delete body and see how many Solid Bodies you have. Kind of cool issue. ugh.
  15. SDETERS

    NX2312 Sketcher and Drafting - Approximate Dimension Symbol

    Toost is correct, once you finish the sketch in the drafting, the symbol should go away. I dislike how these dimensions behave so differently in the drafting application vs the older sketcher. But they should go away once you finish the sketch and pan around.
See more

Part and Inventory Search

Back
Top