Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by RJP78

  1. RJP78

    Hydrometer Test Review

    Was the solution of sodium hex made relatively recently (less than a month old)? You could always check the pH of the solution to ensure its still b/w 8 and 9. If not, remake the solution. Also, isn't it 40 g/L?
  2. RJP78

    where to download CWALSHT

    No prepaid envelope required. A list of available programs is provided via: http://case.wes.army.mil/ProgramList.aspx?var1=4&var2=-1&var3= Their distribution policy requires that requests for software be sent on Company Letterhead to the address provided previously, and be accompanied by a...
  3. RJP78

    where to download CWALSHT

    I don't know of any pages where you can download the program. However, I know that you can obtain it by mailing a request along with a blank CD to: US Army Engineer Research & Development Center ATTN: CEERD-IE (Case Library, Building 8000) 3909 Halls Ferry Road Vicksburg, MS 39180-6199 Note...
  4. RJP78

    Problematic manufacturing slab/mat movements

    Thank you hokie66 and Ron. I had my doubts that such small movements could be avoided. Wouldn't the movements have been slightly smaller had the base materials consisted of a well-graded crushed stone, which has a higher coefficient of subgrade modulus? Thanks again.
  5. RJP78

    Problematic manufacturing slab/mat movements

    To give some background, an assembly table, which is prone to the slightest movement, was placed on an existing 6 inch slab-on-grade within an industrial building. However, the table would become out of level by a few thousandths and fluctuate over time. As a result, the slab was reportedly...
  6. RJP78

    Soil Compaction

    Standard Proctor - ASTM D698

Part and Inventory Search