Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by pupdogg

  1. pupdogg

    Bystronic BySpeed 3015 Y-Axis Binding/Stuttering

    See video here: https://youtu.be/WfNGxMKCsS0. Anyone ever encounter this before? We've already done the following without any success: 1. Cleaned the RLG encoder 2. Cleaned the Renishaw encoder strip and the reader 3. Ensured the ballscrew is tensioned at 5kN as per manufacturer's spec 4...
  2. pupdogg

    LaserView csv files

    CSVs are typically serve as log files or intermediary processing files. Looking at your files, log is obviously a log file whereas the other 2 seem like they might be intermediary job files. By intermediary job files, I mean that when you load a job into the CNC PC and hit the start button, it...
  3. pupdogg

    Wavy cut on Byspeed 4400

    @jetray, were you able to resolve your issue with wavy cuts? if yes, can you please advise what fixed it?
  4. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Resonator Water Fittings Leak

    Has anyone has had their water fittings inside the resonator leak? The Koolant Kooler's chiller seems to be running normal at 60PSI. The laser was out of operation for approx. 8 months but stored inside a shop with temps ranging from 40-80F. Replacing the fittings seems to fix the problem for...
  5. pupdogg

    Plumbing for Cutting/Resonator Gases

    I'm looking for feedback from anyone here that wants to chime in...especially if you're using something different than the more commonly advised. We have a Bystronic BySpeed 3015 w/ 4.4kW resonator and as per their install docs, they recommend using either copper or stainless steel (SS316)...
  6. pupdogg

    Hey @krugtech, your phone or email contact does not work!

    Tried contacting you multiple times via those 2 methods on your website and neither worked...either you are super slammed or your website needs to be updated?
  7. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Air Compressor/Dryer Suggestions

    @krugtech, thank you so much for your feedback. here are a few pictures of our Bystronic BySpeed. Looks like we have 2 bellows. Please excuse the mess as I'm going through revamping the entire machine to make it brand new and giving it a paint re-haul. So you're thinking that we should be fine...
  8. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Air Compressor/Dryer Suggestions

    hey @krugtech, any thoughts bud?
  9. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Air Compressor/Dryer Suggestions

    2004 Bystronic BySpeed 3015 4.4kW with the standard dual shuttle table...no other handling equipment...does that help?
  10. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Air Compressor/Dryer Suggestions

    Hi guys, I'm back with another question for the Bystronic heads! Since this is my first laser, it's been a learning process. My question is: what would you guys recommend as a reasonable compressor that comes with a dryer for this laser? I've been looking at some Kaeser models but am not sure...
  11. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Power Requirements

    Thank you so much for the response guys! We are currently working with our local utility provider to upgrade incoming service to 480V-3P @ 1600A. I can tell you one thing, it NOT CHEAP!!!
  12. pupdogg

    2004 Bystronic BySpeed 3015 4.4kW Power Requirements

    Datasheet for 2004 Bystronic BySpeed 3015 4.4kW laser states that it uses 56kW for the overall system (resonator, chiller and dust collector) running at max. settings. This translates to approx. 70kVA with a 0.8 power factor. With that in mind, I have the following 2 questions: 1) What kind of...
See more

Part and Inventory Search

Back
Top