Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by PROEGUY

  1. PROEGUY

    metric hardware call out

    thanks anyway Sr. Pro/E Mechnaical Designer
  2. PROEGUY

    metric hardware call out

    i'm just try to get a feeling for the syntax only not wheather there is such an object. lets try this: DIN912_M3X0.5X25.4L SHCS, ALLOY STEEL Sr. Pro/E Mechnaical Designer
  3. PROEGUY

    metric hardware call out

    maybe i wasn't clear enough..sorry the CAD part file name is: DIN912_M3X1_5X8L correction to orginal post...can't have a period in a file name and the description is: SHCS, ALLOY STEEL PLATED does this help a little? Sr. Pro/E Mechnaical Designer
  4. PROEGUY

    metric hardware call out

    i'm still working on our "mil-spec" metric hardware library so forgive me if it sounds as if i'm beating a dead horse... is this syntax acceptable for a metric callout in a BOM? DIN912_M3X1.5X8L SHCS, ALLOY STEEL PLATED i'm trying to mimic the US mil spec syntax call out, i.e. MS16995-1 SHCS...
  5. PROEGUY

    dimension scheme

    ok. thanks for all of your inputs. Sr. Pro/E Mechnaical Designer
  6. PROEGUY

    dimension scheme

    here's a PDF to show my scheme Sr. Pro/E Mechnaical Designerhttp://files.engineering.com/getfile.aspx?folder=48423cd7-8ed6-42fd-9f90-d4891ff81d79&file=011038.pdf
  7. PROEGUY

    dimension scheme

    no, just standard dimensions +-.005 Sr. Pro/E Mechnaical Designer
  8. PROEGUY

    dimension scheme

    it's 2 holes dimensioned from a common edge is the way i did it. he claims that using a base line (ordinate) dimension scheme has a greater tolerance stack than if one hole is dimensioned to an edge and the other hole is dimensioned to that hole Sr. Pro/E Mechnaical Designer
  9. PROEGUY

    dimension scheme

    i'm getting redlined on my dimensiioning scheme. i have always tried to dimension from a common edge (datum)and not use chain dimensions. the standard says that chain dimensions have the most tolerance stack while baseline/ordinate and direct dimensioning schemes have lesser tolerance stacks...
  10. PROEGUY

    part description trouble

    thanks for the reply's. CM = configuration mgmnt CM said they need the dimensional info in the description so purchasing knows what to get. i believe the drawing should be the control for what purchasing needs to do any purchasing. BTW the part in question is a square heatsinking material which...
  11. PROEGUY

    part description trouble

    our CM dept is insisting that a dimensional value be included in a part description. i don't think that's correct in that if the part changes physically (size change) the description of the part (embedded dimension) no longer matches the physical dimensions of the part. is there a spec (possible...
  12. PROEGUY

    ISO / DIN hardware specs

    thanks for the links. that's what i was looking for :-) Sr. Pro/E Mechnaical Designer
  13. PROEGUY

    ISO / DIN specs

    i'm trying to develop a CAD library of metric "mil spec" hardware. I've found out that there isn't a mil spec for metric hardware...SHCS, FHCS, washers, nuts, hex bolts etc.is there a spec for this type of application, either ISO or DIN and where can i find such. the specs that i've found are...
  14. PROEGUY

    ISO / DIN hardware specs

    posted in the ISO group as well i'm trying to develop a CAD library of metric "mil spec" hardware. I’ve found out that there isn't a mil spec for metric hardware...SHCS, FHCS, washers, nuts, hex bolts etc. is there a spec for this type of application, either ISO or DIN and where can i find...
  15. PROEGUY

    drawing table for a family tbl

    thanks but i've developed the table myself Sr. Pro/E Mechnaical Designer
See more

Part and Inventory Search

Back
Top