Check your line type scale, type 'LTS' in command line and play around with it so to speak if its at 500 change it to 1 or if its at 1 change it to 100. This will change all line types in your drawing. Or select another line type to use there usually are a couple like dash dot(5x) dash dot (2x).
Brandoncdg; I'm familiar with the Land desktop way, it's the Civil 3D way. In land desktop it will kick out a table for the parcel volumes no problem. In Civil 3D it looks like I can only get a volume table for one at a time using the toolbox, since I roughly do have 50 lots one by one will...
Does anyone out there know how to extract all of the parcel volumes at once in Civil 3D 2009? I've created the parcels, I have my volumes for them only problem is I can only view them individually. In land desktop I would be able to extract a table. Just wondering how to extract that table in...
Create one viewport. Set it up the way you need to and copy and paste the viewport or the whole layout. As far as if you want to switch something from model space to paper space use the command 'chspace' this will also work with from paper space to model. You might also consider locking the...
I'm not too familiar with 2004 anymore. However, I'm pretty sure if you use the command 'arctext' you should get the desired result. You will have to draw an arc first.
If it is already a mesh then just select it and right click. You should see the option of "object viewer" seclect that and it can show you it as a solid rendered.
If your looking for the command to be typed in on the screen and not in the command line. Check to see if dynamic is turned on. If thats not it then you might want to type in "cuiload" and unload your ACAD.cui file and re-load it. The ACAD.cui file might also be corrupeted in which case you...
