But Tc still will not start and there is no CAD Tab that allows you to start NX9 with the toolkit and without Tc
This is what comes up in Internet explorer.(See Picture)http://files.engineering.com/getfile.aspx?folder=7be193da-b455-4be5-9e31-4abd4ffa9e2f&file=Capture2.JPG
Updated my Toolkit to Rev L. Now NX, Teamcenter will not start. I get a God awfull message when trying either. The 6.1 toolkit menu comes up, but nothing will start from there. The CAD tab is gone where you could start NX with the toolkit independent of Teamcenter(See Picture). Now there are...
Updated my Toolkit to Rev L. Now NX, Teamcenter will not start. I get a God awfull message when trying either. The 6.1 toolkit menu comes up, but nothing will start from there. The CAD tab is gone where you could start NX with the toolkit independent of Teamceneter.
When trying to start NX...
There is a very similar reference on GTAC. (PR-05970459) All it says is: For PR Data location please see the Coordinator Notepad I see no other information that would be of help. I search the PR number and get nothing but the same description of the...
I am getting a error of "Invalid Face" that gives me the verbiage when updating object of type centerline in part(Name)
The part is basically an extruded plate with a lot of holes. I don't see anything wrong, sketch is green.
Is there a way to search out the offending centerline in the...
Dell Precision 530MT we are using as a server
We are currently using it as the server for Catia V5r19, UG NX 5,6 & 7 as well as Ideas NXi5. I'm not anxious to switch it out.
Found the Faceted selection under view style. Will give that a go. Any other suggestions for reducing memory problems in views of large assemblies would be welcome.
Under preferences>drafting I see options like Load component on Faceted view selection/Load component on Faceted view Update.
I tried creting another base view looking for a Faceted selection somewhere and don't see it. I am using UGNX6 on a Dell 690 with 4 GB ram Xeon 3.3ghz Processor.
Where...
I am creating an assy drawing to be Ballooned. There are 700 parts in the assembly, many duplicated(Nuts, bolts). When I create the iso view it acts like it thinking.... but never completes drawing the view. Is there something I should be doing to the assembly first or another way of creating...
Unfortunately, No. If there isn't something creating a duplicate or "Rolling file" that comes standard, I wonder if there is a way to set it up.
Have you ever saved a file, and then realized that you needed the old version of something you changed for some reason? This is what I'm dealing with.
Is there any running Backup within UG that would ALLOW me to revert to an earlier version of my model? I am using UGNX6.
I saved a model, not realizing that there was a problem and would really like to get back to an earlier version. I am Working our IT department route but I would imagine...
Got it. It was a combination of Load options entire part & reference set. I'm not sure what else I tried everything many times including recreating the files involved.
