Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by nxprog

  1. nxprog

    Reuse assemblies in the Reuse Library

    Has anyone found an efficient/correct way to use reuse parts in other reuse parts to create reuse assemblies? Some of the reuse parts are simple assemblies themselves. I have found that for the Part Name Management dialog/settings to work all the reuse parts that are included in the assembly...
  2. nxprog

    Help with expression formulas

    I got it to work, but I had to break all the variables down to separate expressions. It would be easier if I can create one formula expression for the "height needed" Thanks, Fred
  3. nxprog

    Help with expression formulas

    I probably should clarify the radii and volume values are established from measurement expressions. Thanks, Fred
  4. nxprog

    Help with expression formulas

    I am trying to create a formula in expressions to calculate the height of a tube given the outer radius, the inner radius and a volume desired. I keep getting syntax errors. The radii and the volume have there own expression establishing there values. Thanks, Fred
  5. nxprog

    The last "John Baker" show

    John, Thanks for all he help over the years and enjoy your retirement! Regards, Fred 7.5/8.5/9.0/10.0
  6. nxprog

    How long does it take for some menus to open?

    No... I have a Mach 3 License with the PDW wizard, but I was told by someone at GTAC that the PDW wizard does use some pieces of Teamcenter. 7.5/8.5/9.0/10.0
  7. nxprog

    How long does it take for some menus to open?

    I was curious how much time other peoples computers takes to open some menus, namely the customer defaults, file properties or file/new. I'm talking about when I have an empty file. On my machine it takes 1.5 to almost 2 seconds just to open these menus. I'm working in NX8.5 right now. Am I...
  8. nxprog

    Metric Fillet/Chamfer Commands

    I am trying to make a custom command so that when i start the fillet/chamfer command it invokes the calculator inside of the radius/distance part of the command so that i can type in a value to get a metric result (3/25.4)....I have made custom value fillet/chamfer commands, but i cannot seem to...
  9. nxprog

    Create custom Chamfer commands with different values

    How do I create custom Chamfer commands with different values. For instance I want a chamfer command for a 1/16” , 1/8”, 3/16”, and 1/4" I would prefer to have separate icons for each size. I'm having trouble with the exact syntax. I am using AutoCAD Mechanical 2015.
  10. nxprog

    License borrow / share

    All this week (after today) and next week...Its snowing where I'm at now...so looking forward to Southern California sun NX 7.5/8.0/8.5/9.0
  11. nxprog

    License borrow / share

    Thanks John...I'm traveling tomorrow, so due to time constraints my VAR set me up with an emergency license for now, but we did get the ball rolling on acquiring a license file that allows 'borrowing' for next time....but ya know...I will be in the Cypress area...maybe I can just stop in the...
  12. nxprog

    License borrow / share

    My NX CAD software is running on a Dell Precision T5500. I'm running NX 7.5, 8.0, 8.5 and 9.0 on this machine. I also own a Dell M4600 Precision Laptop. I need to be able to run at least NX8.5 on this laptop while I'm traveling. I already installed the LMTOOL and NX8.5 base and docs on the...
  13. nxprog

    Install NX 8.5 64bit on W764bit machine with excel 32bit...what will i lose?

    That's good to know...Thanks NX 7.5/8.0/8.5/9.0
  14. nxprog

    Install NX 8.5 64bit on W764bit machine with excel 32bit...what will i lose?

    Good Morning John, thanks for the reply. I will move forward and install NX8.5 on the laptop. After I posted this I dug thru some old emails...and I was told a while ago you need 64bit office/excel when installing on a 64 bit NX install IF you plan on using the prog die wizard (PDW)....If...
  15. nxprog

    Install NX 8.5 64bit on W764bit machine with excel 32bit...what will i lose?

    If I install NX 8.5 (64bit) on a Windows 7 (64 bit) machine that has excel (32 bit) what functionality will I lose with NX? Will I still be able to open and translate files? Will I only lose the ability to use excel INSIDE NX? I will be traveling and need to share my NX license on a laptop...
See more

Part and Inventory Search

Back
Top