Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by NotHandyRandy

  1. N

    Anchoring scissor car hoist/lift

    As I said initially mentioned manufacturer is out of business, so I have no source or guidance. Not seismic zone Personal use I’m very familiar with Hilti epoxy system install, I own dispensing gun. As far for torque, I have multiple torque wrenches with recent calibration +- 1-2% which is...
  2. N

    Anchoring scissor car hoist/lift

    Thank you To visualize this further In my case lifting points are close the outside edge, with no to minimal over hang in reality. what do you gentleman think ? 5/8 epoxy hilti drop in anchors, they spec for thicker concrete in reality, but I will reach proper embedment ? Or shall I just...
  3. N

    Anchoring scissor car hoist/lift

    Yes 1/2” for most part I guess there is tipping inward possibility with arms, in my case cars are sitting above the platform, or outer edge / arms are never extended outside the platform. Many of the imported scissor lifts are considered portable they are inter connected platforms, here the...
  4. N

    Anchoring scissor car hoist/lift

    Appreciate suggestion, thank you I actually put that by Accident in wrong forum :)
  5. N

    Anchoring scissor car hoist/lift

    Hello, Mounting scissor lift Hi everyone, I recently acquired a mid-rise scissor car lift rated for 9,000 lbs, and I'm planning to use it for vehicles up to a maximum of 5,500 lbs. Here's a photo of the lift: 📷 lift dimensions: https://i.ibb.co/CsVGv8QB/IMG-7145.jpg Unfortunately, the...
See more

Part and Inventory Search

Back
Top