Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by mikehsieh

  1. mikehsieh

    Offset of non-planar curve

    I am not certain how the command "Offset" will prompt for faces to offset to. Maybe you mean the command "Project" instead? The "Offset" command does not consider offsetting planes, as it offsets in 3D. What should the end result curve be? (2D curve that is on a ref plane or 3D curve in...
  2. mikehsieh

    Surface projection in I_DEAS

    Enrique, The command "Project" in Modeler is the only operation (other than focus) that I can think of. This command does not project an entire surface and its contour onto a plane, however, it will project all bounding edges from the surface onto a specified plane. Projection result will be...
  3. mikehsieh

    Will there be an IDEAS v13

    NX I-deas 5, aka I-deas13NX, will began shipping around June 2007. Hope this helps, Mike
  4. mikehsieh

    I-deas v12NX - Error : Insufficient space in caller buffer

    If user name used to login to a domain is longer than 16 characters, then error mentioned will occur in the outputXXXX.out file. On your company domain, what form of login are used? There are some companies using form of "Firstname.Lastname", which is a condition that may easily exceed 16...
  5. mikehsieh

    Refresh & Redisplay Zooming out

    Does this happen to all parts? For example, make a simple block and repeat the refresh/redisplay on it, now if that block also zoomed way out, then it may be caused by another part on the workbench, maybe an untitled part that is not tracked by Manage Bin? If issue is part specific, and this...
  6. mikehsieh

    I need some help with macro programming.

    I am able to duplicate this, didn't have too much time to diagnose the cause, but was able to come up with a quick workaround to make the macro run. I took out the "goto" from the IF-THEN statement and have it directly run the procedure call. Below is the modified version of the macro that...
See more

Part and Inventory Search

Back
Top