You guys are magnificent!
bimr just give me a very good picture of what I need to do with my prolems. Thanks for all of you. Hope I'll be as expert as you guys someday.
I would like to thank all of you for your advice. All has been focusing to the distribution line cleaning.
Is there any advice focusing on the water itself before stepping into the distribution system other than remineralization? Water content is already on the standard pH, is there anything we...
Dalcazar, how about the ozone process of the distribution line how does it work? Do I need to insert somekind a UV inside the pipeline to eliminate the biofilm?
Hi dalcazar & bimr,
thanks for the info above.
The pipe size is about 300-350 mm lines. How often do you think we have to sanitize it? Will there be any treatment process we can do for the newly treated water before it steps in the distribution system considering that we have a regular washing...
My client is planning to utilize the existing distribution system to convey the newly treated water with pH level of 6 to 7. Since the water is treted with RO and pH adjustment, its mineral content, including calcium, is very low. The distribution system is made up of cement-lined iron pipes...
PLEASE HELP IN OBTAINING MANUAL ON HOW TO START-UP, COMMISSION AND MONITOR A CHLORAMINATION TREATMENT PLANT.
THIS IS THE FIRST TIME WE HAD IT IN OUR REGION. WE HAVE PURCHASED THE EQUIPMENT AND ABOUT TO INSTALL IT. IF SOMEBODY OUT THERE WHO HAD COMMISSIONED BEFORE A CHLORAMINATION PLANT PLEASE...
Hi bimr,
That was a very useful information. Can you give me any company name where I could buy this evaporator? Also, would like to know what else H2O minerals will evaporate together with chloride? How can I size up this evaporator? What is the estimated power needed to use in the evaporator...
I need a basic understanding of how easy or difficult it might be to treat some high chloride acidic wastewater.
We are regenerating water treatment resins using hydrochloric acid and the resulting 4-5 cu. m per day of wastewater has a chloride content of 7,000 - 8,000 mg/L.
The limit for...
Thanks for the advice bchoate. You are actually going through the process of answering my question clearly but where does the HAZOP study begins? Please feel free to explain further if you still have something to say since I'm learning from your point of views & experiences.
I would like to thank you for your advice epoisses & IR stuff but unfortunately what I need is the deliverables that I would be needing to start the design. Like for example I need to produce an esterification plant. Should I start by doing the Chemical chain with all the oil structures on it to...
I had a five years experience as a Process Design Engineer but everytime I join a project it was already started & the Process Flow Diagram has been finalized. My problem is if I start to create a chemical process plant from scratch, how should I start?
