I can't help you with your resume since I am electrical in nature, but this is what I did when I was a few years out of school:
-Look around at all the opportunities to learn in your company.
-Set some goals for yourself based on that.
-Communicate this to your management.
-When you see a...
I use AutoCAD LT as well for schematics.
I have heard many good things about AutoCAD Electrical, when applied to electrical control panels. I just haven't gotten to the point where the price justifies the means yet.
Some of my buddies like the www.SKM.com software for Power designs, and you...
Yes, go to www.automationdirect.com and download the manual for it. Make a 120V cord up and plug it in. Hook up a 24V switch for an input and a 120V light for an output, and have at it.
For a 50HP, 460V motor Design B the FLA is 65A.
The max. inst. setting = 11 x 65 =715A
You are allowed to go up to 17 x 65 =1100A if the 715A is proven to be too small for the starting current.
A 100A Square D Mag. only CB will work nicely. I assume your brand is similar, you'll have to verify...
For the test I think Process Meas. and Process Control are the most important.
You should look into used books from previous editions if you are just buying the books for the test.
I used the 2nd edition of Process Control and the 3rd ed. of Process Meas. and I did fine.
You can get alot of...
I just took the CSE-PE exam this last October and passed.
I used the recommendations on the webpage that xnuke is pointing you to. If you follow the advice given you will do well.
You do not need to buy every book they recommend, but you need a decent representation of the subjects that...
Go with what you are familiar with.
I used the HP33S this past October because I use HP calculators. I also bought the Casio model for a backup, I liked it also it was very easy to use.
After purchasing, make sure you practice with the calculator so you can perform all the functions you...
The variable CurObjNo% does not relate to an item in the Item array, or is Item a collection? Has Item been initialized correctly?
If Item is a collection then:Collections are 1 based, and CurObj% may equal zero. That is usaually what happens to me in these cases.
No, it is a servo motor, not a stepper. I replaced something thatlooks just like it not to long ago, although I think mine was just a DC motor, not a servo.
Baldor is usually pretty good about handling old motors, have you checked with them?
I can't answer your question, but you may receive more answers if you post on the forum at www.ppi2pass.com
I have found it useful for other questions relating to the FE & PE exams.
[COLOR=red]"Does 1 piece flow really mean 1 piece flow? so producing lets say 10 items in every cell and passing it(crate of 10 items) down to the next cell would not be considered 1-piece flow? Or would each cell send down 1 unit as soon its cycle is complete? Does that really make sense...
