just at the first search
http://search.babylon.com/?q=Racon%20Point%20Drill&tl=en&babsrc=conduit&ctid=CT1460988&SearchSource=3
http://www.mohawkeuropa.com/ti_mohawk/CAT_36.pdf
The subject , from the ASME VIII UG 27 states
When the thickness does not exceed one-half of the inside
radius, use the given formula ..and so on
My question: for a given hollow diameter no more than 10 mm
known the material property as
S = maximum allowable stress value
Static...
Normally the FLUID COUPLING's are fill with oil or other suited liquid.
But also there are ones filled with small solid particles , the same used to shoot penning.
It is used to link an AC asynchronous motor rated 440 Kw @ 740 rpm , to a hammer mill in a Cement plant
Do you know any about it ...
Which is the Standard that handle the test for Hydraulic Hose used at hydraulic steering sytems in CArs and small truck. I have a brief description of the procedure , For return or suction hose . start at 0 Barg , rise to 4 Barg in 0.2 second, hold at 4 Barg by 0.4 sec , down to 0 bar in 0.2s...
Which is the Standard that handle the test for Hydraulic Hose used at hydraulic steering sytems in Cars and small truck. I have a brief description of the procedure , For return or suction hose . start at 0 Barg , rise to 4 Barg in 0.2 second, hold at 4 Barg by 0.4 sec , down to 0 bar in 0.2s...
