Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ekieder

  1. ekieder

    PLS CADD

    Thanks once again Transmission Towers I contact PLS Support three times a weeek but they normally send me to read their webpage where they use PLS CADD/Lite and PLS Pole and have an example of a wooden pole which it´s "quite" less complicated than a double circuit 400 kV Tower. I guess they...
  2. ekieder

    PLS CADD

    Thanks again for your answer Tranmission Towers. I have reached the point to generate .lic files and therefore to modify .m2 files. To do that I draw some towers and string the wires and fiber, once that was done I defined all criteria including Structure Loads (Method 3,4). But I don´t...
  3. ekieder

    PLS CADD

    Hi TransmissionTowers First of all, thank you for your answer. I don´t understand the way to carry out the simulation. After opening a .tow file in PLSCADD by using Structure->Structure Edit I get to PLSTower but when I go to Loads it ask me to load a .lca file. If I open a .m2 file I can...
  4. ekieder

    PLS CADD

    Hi Transmission Towers PLS Tech Support ansewered me taht I ´ve to create new .m2 files as weather conditions changed and therefore loads too. Now my problem is finding the way to export climate casesfrom PLSCADD to PLS Tower. I am not sure either whether I have to generate a .lca file or a...
  5. ekieder

    PLS CADD

    Thanks a lot Transmission Towers akwardly I erased some mails and I didn´t notice your answer. I am going to contact the PLS Tech support in order to have more information about .m2 files Thank you again
  6. ekieder

    PLS CADD

    Hi Transmission Towers thanks a lot for the help So if I have got the .m2 file Can I simulate the line for any weather case? I mean, if in Norway per example they use finnish towers and I have got their .m2 files. Can I run Optimum Spotting with those .m2 files, once I have defined the Criteria...
  7. ekieder

    PLS CADD doubtfully

    Thanks a lot for your help I have got another question, as I am running PLS CADD for a non specified rule. I think I didn´t understand well the way of using PLS Tower with PLS CADD. With PLS CADD we obtain a model of how the forces affect towers. So imagine I have to run for example EN...
  8. ekieder

    PLS CADD

    Thanks a lot for your help I have got another question, as I am running PLS CADD for a non specified rule. I think I didn´t understand well the way of using PLS Tower with PLS CADD. With PLS CADD we obtain a model of how the forces affect towers. So imagine I have to run for example EN...
  9. ekieder

    PLS CADD

    Hi "Transmissiontowers" and thanks a lot for your help. I am following the procedure we commented previously, but when I run Optimum Spotting sometimes it strings the line on zig zag, connecting the left cross of a post with the right one of the following. I don´t know if it´s a common error...
  10. ekieder

    PLS CADD

    Thank you very much "transmissiontowers". I am following your advise and I continue visiting Power Line´s webpage with its interesting technical documents in order to emerge victorious from my personal "battle" against the manual ;). PLS Tech support also answer quite quickly my concerns about...
  11. ekieder

    PLS CADD

    Thank you very much "transmissiontowers", I thought maybe using PLS Tower I could generate a simplified model to be used by the Optimum Spotting. So after selecting the possible structures and once I´ve simulated them with one single conductor (what would it happen if terrain has got and...
  12. ekieder

    PLS CADD

    Hello I´ve just started to work with PLS CADD, I´m having a little bit of trouble, and I´d be really grateful if someone could give me a hand. I have got cartography, towers´ models, described extra-cost & prohibited zones and already defined criteria and now I´m trying to use Optimum...
  13. ekieder

    PLS CADD

    Nobody can help me? I´ve seen how people on this forum (i.e. rubenpezu) spoke about PLSCADD.
  14. ekieder

    PLS CADD doubtfully

    Nobody can help me? I´ve seen how people on this forum (i.e. rubenpezu) speaking about PLSCADD.
  15. ekieder

    PLS CADD doubtfully

    Hello to everyonehttp://www.eng-tips.com/threadminder.cfm?pid=238 I´ve just started to work with PLS CADD, I´m having a little bit of trouble, and I´d be really grateful if someone could give me a hand. I have got cartography, towers´ models, described extra-cost & prohibited zones and already...
See more

Part and Inventory Search

Back
Top