Recent content by djhurayt

That would be SolidWorks Plastics https://www.solidworks.com/product/solidworks-plastics I have not used it personally, so I cannot comment on its validity.

Questioning the food processing idea due to the idea that it looks like the center hole is rusty... or is that chocolate I see? None-the-less, isn't most food processing equipment made of stainless...

Why not use a die set as in the four post unit pictured off to the right in the link?

one layer of plating, so it appears to be some type of alloy contamination ???, always possible but do not know, these are basically off the self items for the diesel fuel injector industry

We have the same part offered by two difference vendors. On one vendors part the plated area is plated with 100% Cr per SEM analysis. The SEM on the other parts show the plating to be 95% Cr and 5% Ag. My question is (with little knowledge of chrome plating) what is the purpose of the...

One reason could be wear. As other parts in the system (or even the damper itself) wear, friction can increase or decrease and the system may need more or less damping force to account for the change. Or in the case of a hydraulic system it may require different damping as the oil heats up...

to expand upon DG's answer: the same basic number with an A, B, C, etc. prefix meant to say suffix

California dive boat owners don’t want to pay victims’ families: court papers The owners of the dive boat that caught fire off the coast of Southern California, killing 34 people aboard, say they shouldn’t have to pay a dime to the victims’ families, according to a new report...

nothing ??? OK maybe I should ask if anybody know if copper crush washer are governed by some organization.

Can somebody point me to specs that govern the copper crush washers that are used in automotive braking/hydraulic systems?

maybe he was just trying to get as far away as fast as possible story link EDIT: typo fix

We are trying to replace a manually controlled pressure reliving valve in a very simple hydraulic system with a Parker AP04G2YP21CN valve. hydraulic circuit However every time we start to energize the valve (increase pressure to the application) the valve oscillates uncontrollably. As we try...

On a screen door cylinder like John has posted it is called a "hold open clip"

Thank you, that is the image I was looking for but could not find. Is that from Alan Krulikowski's book (which I don't have with me)?

Any suggestions on how best to control the six ground diameters of a shuttle valve piston. The perfect part would have: 1) all the diameters exactly the same 2) all the diameters concentric with each other Thoughts: 1) let one end be datum A, the other datum B and a callout for total runout of...