Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by DASKAT

  1. DASKAT

    Transformers in control panels for an AC unit

    Thanks guys, both answers make all the sence in the world.
  2. DASKAT

    Transformers in control panels for an AC unit

    Ok Guys, I am looking for opions here. In my plant we have a panel with 2 transformers. a 3KVA just for control power and a 2 KVA just for the AC. Before my time an AC unit was replaced with a wrong model, a 230VAC unit. Being good little electrician and wanting to get the system back up, they...
  3. DASKAT

    VFD's for home AC use.

    Thanks Dave Great post, Kept us laughing for a while, and very informative as the other posts have been. Thanks to all. Daskat
  4. DASKAT

    VFD's for home AC use.

    I am in the middle of a discussion with a friend on the possible use of a VFD for the operation of a Home AC compressor. I think this would greatly enhance the longevity of the system and increase the efficiency also. Any thoughts on this?
  5. DASKAT

    Certification?

    John, Thank you for the valuable post. I would love more info and your post was one of the most concise I have read on this site. Keep up the good work. ssn_tough@yahoo.com
  6. DASKAT

    Certification?

    Hey folks, I work for an instrumentation and testing firm and am wondering how to get certified as a thermal imaging inspector in order to help my company grow. Any help would be appreciated. DASKAT
  7. DASKAT

    Cheap & dirty sump Control

    How about an Allen bradley Pico controller cheap and you can use it to set alarms or or indicators. less than 200 bucks.
  8. DASKAT

    MVI56-MCM to UDC3300 communications

    Would this be a Prosoft Card? If so there is a softwear disk that came with the card. Warning these cards will Probably take the better part of a week to learn and require alot of asprin. you will also need to determine the commands and address accepted by the UDC3000 then you must decide if the...
  9. DASKAT

    MSG command for AB PLC-5's ?

    Jonesy Thanks I finially got it to work and have made the following observations. 1) The control block is at least 10 words long so don't have the control block in the same file as the words being transfered. 2) Yes this command can be programmed online using RSLogix 5. so again thanks and have...
  10. DASKAT

    AB Panelview CE w/ RSView enterprise

    Me again, I was wondering if any knows how to access 2 PLC's in the same project or if it is even possible? TTFN THE KAT
  11. DASKAT

    MSG command for AB PLC-5's ?

    Hi folks I am attempting to share data between 2 AB PLC-5's I have tried to no avail to send one simple word between them. Both PLC's are on the same DH network. I continueously get an error message that I have not correctly formatted the control block. The questions I have are 1) Is this...
  12. DASKAT

    AB Powerflex 4 drives?

    Thank you so much that maks all the sense in the world. I'll have a tougher one next time.
  13. DASKAT

    AB Powerflex 4 drives?

    I am using AB Powerflex 4 drives for a conveying system. The drives are 1 Hp while the motor are only 1/2 Hp. These drives are being controlled by an after market modbus protocol card. And the Question is this, When the drive starts it does not ramp, instead it goes directly to its max Freq then...
  14. DASKAT

    date algorthim for an Allen Bradley PLC

    Rdub, thanks for the help but every time I attempt to use the MOD function in the program my PLC crashes horifically and I think the basic equations may be off as I attempted to work them by hand and was unable to come up with a sufficient answer.But thanks again for your time. TTFN THE KAT
  15. DASKAT

    IQ 2000

    Say Folks, I am attempting to create a vibration analysis program in my plant. about 11 years ago to company bought an IRD fast track monitor and the IQ 2000 software. I have resurected the monitor but I am mising disk 1 of 5 of the IQ 2000 software. I know that IRD was bought out by Entek which...
See more

Part and Inventory Search

Back
Top