Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by danny_B

  1. danny_B

    Circular fillet weld acc. Eurocode or any other european standard

    No, sir
  2. danny_B

    Circular fillet weld acc. Eurocode or any other european standard

    Hello! I need help dimensioning my fillet weld to the left in attatched picture acc. some european standard, preferably, hence figuring out the required throat thickness. So, my initial thought was that if i treat the Moment M, like a couple, my force in upper weld would be F = M/D, so, the...
  3. danny_B

    Boundary conditions?

    Hello sirs! I have a question about boundary conditions, lets say for example that i have a wheel thats in a U profile, what would i set the boundary conditions to be? My thought is like we are talking about small deformations when it comes to static analyses so, if it has some clearence, lets...
  4. danny_B

    Ansys APDL Beam Sections Update Elements

    Hi! I have a Ansys APDL question. If i define some different beam section types, choose the first one and define nodes and create one element between the created nodes and run the simulation. If i then want to use another sections and run another solution and compare the result, do i then need...
  5. danny_B

    Linear orthotropic solid186 elements Ansys APDL

    Hi all! If i use solid186 elements for example and i model a square in 2D in the XY-plane. Now i use vrotat so that i have a rotated volume instead and use csys 1, so that i have cylindrical coordinate system. If i now define this as a linear orthotropic material with Ex,Ey,Ez and the...
See more

Part and Inventory Search

Back
Top