Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Azzza

  1. Azzza

    Manufacturing, 4 axis sweeping with HSM issue?

    When using a 4 axis sweeping operation with HSM between pass links the posted program has additional points during the HSM movements. E.g.the program has an x,y,z position then the same x,y,z position with an a and c move. This is repeated for each position of the HSM move. These additional...
  2. Azzza

    Catia machining negative offset on part??

    I have a contoured part that needs to be machined (3 axis mill) undersized. I would usually just use negative value in the offset on part but I have found if I use a negative value greater than the diameter of the tool (e.g. -40mm offset with a 20mm tool) the path will not compute! Any tips for...
  3. Azzza

    User moving from GM NX to Ford Catia.....?

    I understand that specific company processes are tightly held secrets and would not expect anyone to discuss deep dark secrets in a public forum! I was more trying to get an understanding of the different modelling methodologies and geometry linking methods used between NX and Catia. I am sure...
  4. Azzza

    User moving from GM NX to Ford Catia.....?

    Hey guys, I'm a reasonably fluent CAD designer having previously work for GM for a number of years as a designer on NX. I am now looking to move over to Ford using Catia, I have done some basic training that is available through Catia agents locally but im looking for any information about how...
  5. Azzza

    Creating multiple revisions in Teamcenter

    Thanks for your help! Admins are less than helpful around here, looks like I have a day of revising items to do!
  6. Azzza

    Creating multiple revisions in Teamcenter

    Hi Guys, Is there any way in teamcenter to create revisions of multiple items in one operation? I'm using TcAE 8 and NX 7.5 Thanks Aaron
  7. Azzza

    Can't select material spec in one-step formability analysis

    Hi Guys, Trying to use different material spec in the one step formability tool but i wont let me select any. There is no materials listed in the materials window. It seems to default to the material spec in the customer defaults. any ideas? version 7.5.2.5 Thanks Aaron
See more

Part and Inventory Search

Back
Top