Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by anq

  1. anq

    surfaces in wildfire

    Late answer, but use "fill" in the edit dropdown menu.
  2. anq

    Pro/e wildfire or catia V5 for Yacht Design & Engineering

    Hi Tiasimo, Interesting that you say you are designing yachts in Barcelona. I was based there for 4 years between 1997-2001 working on different yachts in Port Vell and the yard. Are you a start-up? When I was there, I dont think there was a yacht design place. I guess its taking off now...
  3. anq

    Forcing an angle dimension on near parallel lines?

    Its actually not that difficult. We are using Wildfire and in the config.pro there is the possibility to set the min acceptable angle. We had the same problem as you as i think the default was set as 1 degree and less than this it didnt accept it. Try it and see if it works. The config...
  4. anq

    Why is there no undo command in Wildfire - PTC?

    Thanks for all your comments. I don't understand how asmenut and ohio30 are so happy about the fact that there is no undo command. I was hoping for a reply from PTC, but alas not this time. Ciao.
  5. anq

    Why is there no undo command in Wildfire - PTC?

    We recently puchased Pro-E and are still recovering from the shock that PTC have not included an undo command in their program. Can PTC say if and when they intend to include one. Program looks good if a little mixed with the previous version but it has been some time that I have seen a...
  6. anq

    Pro E versus Inventor

    Dear asmenut, I don't understand why you say Pro-E is more cumbersome to use. From the demo, the interface of wildfire looked very similar to inventor and it required the same amount of "clicks" to build a part. Is there something I am missing? As for use, we will use it for...
  7. anq

    Pro E versus Inventor

    We were on the point of deciding for Pro E wildfire, when Autodesk dropped their price even further. It is now substantially cheaper than Pro E, but we still haven't been able to prove if technically Pro-E is better. (that is after seeing a demo of each). Has anybody else had the luck to try...
  8. anq

    Pro E versus Inventor

    Price is the same. Yearly subscription is the same. Training for Pro E is higher but it seems to have a lot more stuff in it. Interface for the 2 "looks" similar, but Inventor seems "cleaner" (probably because it has less features). Pro-E is winning the race because it...
  9. anq

    Creation of 2D drawings with Pro-E

    We are (still) looking at mid range modelling programs and one of the unclear points about Pro E is: is it capable of producing 2D drawings without exporting to a 2D program? For example, Inventor from Autodesk replaces your normal 2D package as it will automatically create 2D drawings from...
  10. anq

    Compatiblity of Inventor with other design programs??

    We are looking to buy a reasonably priced 3D drawing package to do our own in house design and draughting work. Products that we are interested in designing vary from plastic parts to machinery. Currently all 3D design work is done outside and so the drawing packages used vary between the...
See more

Part and Inventory Search

Back
Top