Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by AAEC

  1. AAEC

    soil upheaval causing concrete to rise and crack

    We already demolished the concrete and plan on replacing with a new concrete slab but I am not so sure how to deal with the original soil that expanded when a 2" underground emergency eyewash/shower line leak. What should I do with the original soil? Do I need to excavate and replace it with new...
  2. AAEC

    Acid Exposed Concrete

    Thanks for the input especially to Ron.
  3. AAEC

    Acid Exposed Concrete

    Have this concrete that is already exposed to acid. You can tell that matrix holding the aggregates is partially gone and you can see the aggregate. I don't want to demo this concrete and I wanted to save it and overlay it with good sound concrete that is resistant to acid and base with PH...
  4. AAEC

    Asphalt Ramp Driveway

    ACtrafficengr, Thanks for the wealth of recommendations. I will follow up on the website you mentioned and hope to get an answer from there.
  5. AAEC

    Asphalt Ramp Driveway

    We have this existing driveway that a has swale and would like to cover the swale with a built up ramp (hump) to re-direct surface water flow (see attached sketch). I have two questions that I am not so sure about. 1. In order to build the ramp, should I remove the existing asphalt top and...
  6. AAEC

    Bonding Construction Joints

    When I was a newbie on the jobsite, I saw contractor poured lean concrete first at the joint (probably about 1" thinck or less) interface between the footing and combination of retaining/containment walls. Then the contractor sub-sequently poured the regular concrete on top. I checked the...
  7. AAEC

    Carbon fiber to strengthen bridge panel

    Thank you all for your answers. I have this contractor that will provide me examples of his work and more information about the product. The contractor do design and build project. Will see what they have. Will try to get you update.
  8. AAEC

    Spacing between a fire hydrant and industrial plant (Acid/Amine Plant)

    I am concern about the distance between the fire hydrant and acid plant (source of the possible fire). This plant was built in 1960s and code is diferrent at that time. I have a project to put a containment wall around the acid tanks and as much as possible, do no want to relocate the fire...
  9. AAEC

    Carbon fiber to strengthen bridge panel

    Has anyone experience installing this carbone fiber made by Fortress Stabilization Systems? This carbon fiber is to help strengthen existing concrete. I have this bridge rehabilitation project that this carbon fiber maybe of good use to save the bridge from being replace.
  10. AAEC

    wheelstop distance to fence

    Is there a standard to show where should I locate my parking lot wheelstops? I am looking for the distance between a wheelstop and the fence. These wheelstops will prevent hitting our perimeter fence.
  11. AAEC

    Where to connect drain pipe

    Thanks for all the reply especially to Hoagie for the comparison between intersecting the existing line vs connecting the new line to the existing catch basin/manhole.
  12. AAEC

    Where to connect drain pipe

    I failed to mentioned that all our storm sewer is treated in our treatment plant so as the other liquid mix. Just got an update that the other liquid mix will be neutralize before it goes in the storm sewer pipeline. This is better for me since I only need to be concern with one connection...
  13. AAEC

    Where to connect drain pipe

    We are planning to construct a concrete secondary containment with a sump to drain out either rainwater or other liquid mix. In order to drain the liquid inside the containment, an inlet pipe will be connected at the sump directly either to an existing drainline pipe or to an existing concrete...
  14. AAEC

    Bridge Rating Levels

    I have this Bridge Load Rating Report that was prepared by another company. In the report were definitions that I need easier explaination to a layman terms. The reference is from Guide Manual For Condition Evaluation and Load and Resisance Factor Rating (LRFR. The two rating levels that I...
  15. AAEC

    Secondary Containment Options

    DMW0001, Thanks for the suggestion. This should work for a secondary containment where if there is a spill, it is neutralize with sodiom hydroxide. One question, did you have experience placing this type of concrete mix at a sulfuric acid tank storage area?

Part and Inventory Search