Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by 13910634301

  1. 13910634301

    Section cut for Catia V5 R9

    Hi gpublic: Maybe you can try the function of CATIA DMU if you have it on your CATIA. There is a function called "Sectioning" in the CATIA DMU Space Analysis Workbench. It can do some work you want to do and no need to split it.Try it pls . Good Luck Chen
  2. 13910634301

    creating solid part geometry from a surfaced part in V5

    Hi qpublic: We can close the surfaces into solid in the part design , but remember first you should join all the surfaces you created together , and then close the joined surface . Maybe it's why you can't close it. Good luck Chen
  3. 13910634301

    creating solid part geometry from a surfaced part in V5

    Hi : The functoin called surface_based feature , you can find it in the Part Design workbench. In it, you can get four icon , Split , Close , thickness and sew , that the function you need.
  4. 13910634301

    Catia airfoil design

    Hi : I have a CATIA demo about this fuction what you care about. In this demo, we can type all the point coordinates data into the Microsoft Excel. And then run a macro, the macro will input all the points into CATIA automaticly. And then create the spline and loft surface automaticly...
  5. 13910634301

    PP Instruction ( Manufacturing)

    As I know , in every workbench of machining , there is a icon called "Post-Processor Instruction", What you should do is click htis icon and then click the program's name on the Specification Tree , a dialog box will pop up , then you can enter your PP Words. Also there are some...
  6. 13910634301

    Tubing or Piping for V5/R5

    If you have some Microsoft VBScript experience,maybe you can get what you want with catscript. Find two files called PslTubingExtract.CATScript and PslTubingExtractTemplate.xls in your CATIA installation folder. And copy them in a tem folder. Click Tools - Macro - Macros. Select...
  7. 13910634301

    Tubing or Piping for V5/R5

    As I know, we can only find K-facors definition in the CATIA V5 Sheet Metal Design and most of them are plate sheet metal. What I have is V5R9, so you can't bend your piping with the K-factor I think.
  8. 13910634301

    Face creation

    In V5 you can define the maching area or select the limiting contour.
  9. 13910634301

    Tubing or Piping for V5/R5

    Hi: Can you access to V5 Generative Shape Design? My suggestion is using the sweep function under it. First creat the 3D routing curve and then click the sweep icon choose the circle type , select center curve and enter radius ,you will get the surface of the pipe . If you wanna get the...
See more

Part and Inventory Search

Back
Top