Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plastics Engineering general discussion

MechMatengineer
  • Question
Quality control for plastic piping
Replies
1
Views
3K
Pud
Pud
subsearobot
  • Locked
  • Question
sourcing optical PMMA
Replies
1
Views
2K
Mech1595
Mech1595
enginesrus
  • Locked
  • Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
3K
TugboatEng
TugboatEng
Buckshott00
  • Locked
  • Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
857
Buckshott00
Buckshott00
rollingcloud
  • Locked
  • Question
[CIE76] How much of delta-E does this represent?
Replies
7
Views
885
IRstuff
IRstuff
Splint
  • Locked
  • Question
Rotomolding materials suppliers in Australia - small quantities
Replies
0
Views
709
Splint
Splint
Thanh_fromVietnam
  • Locked
  • Question
Best plastic material/ grade for Plastic Pallet 1
Replies
2
Views
981
dgallup
dgallup
YossiD
  • Locked
  • Question
Acrylic=PMMA?
Replies
2
Views
877
IRstuff
IRstuff
skengg
  • Locked
  • Question
THERMOPLASTIC COMPONENT PART CRACK 5
Replies
12
Views
1K
skengg
skengg
bouchra aya
  • Locked
  • Question
PP STRAP
Replies
2
Views
679
IRstuff
IRstuff
Azeen
  • Locked
  • Question
Mixing virgin and recycled Polypropylene Granules in single use plastic straw extrusion machine
Replies
5
Views
874
Linda0510
Linda0510
jlw1950
  • Locked
  • News
Steel Rotolining with micropellets (0,5mm) instead of powders (0,1-0,5mm)
Replies
0
Views
668
jlw1950
jlw1950
PatAero
  • Locked
  • Question
Barbed press fits, allowable stress vs required
Replies
0
Views
749
PatAero
PatAero
Snowshovel1
  • Locked
  • Question
Best plastic material /grade for snow shovels
Replies
4
Views
2K
IRstuff
IRstuff
Tegguy
  • Locked
  • Question
Creep in 3D printed Nylon
Replies
12
Views
2K
Tegguy
Tegguy
hhandoko
  • Locked
  • Question
Creating Colored PMMA/Acrylic For Color Matching
Replies
0
Views
742
hhandoko
hhandoko
titan0106
  • Locked
  • Question
unidentified liquid rsidual on the surface of connectors (PA66+30GF injection molded)
Replies
1
Views
808
Pud
Pud
clyde Verse
  • Locked
  • Question
Any way to produce a 100% same plastic lampshell without injection mold?
Replies
5
Views
997
Pud
Pud
99ishvr4
  • Locked
  • Question
Improving pipe threads on LDPE injection molded component 1
Replies
12
Views
1K
Arnaud Divialle
Arnaud Divialle
Myint Mo
  • Locked
  • Question
Injection Modling Machine 1
Replies
2
Views
807
Myint Mo
Myint Mo
You must log in or register to post here.

Part and Inventory Search

Sponsor

Back
Top Bottom