Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME (mechanical) Code Issues

dave2109
  • Locked
  • Question Question
Boiler Feedwater Pressure Requirements
Replies
4
Views
1K
davefitz
davefitz
nstress
  • Locked
  • Question Question
l/d ration of vessel
Replies
3
Views
879
davefitz
davefitz
sayee1
  • Locked
  • Question Question
Weldolet to be welded to a pig launcher
Replies
3
Views
282
LSThill
LSThill
wrangler
  • Locked
  • Question Question
ASME BOILER CODE TABLE UCS-23
Replies
1
Views
598
deanc
deanc
techmx
  • Locked
  • Question Question
ASME B31.1 & B31.3 codes, failure criteria
Replies
9
Views
600
srk
srk
Ludwik
  • Locked
  • Question Question
Looking for standards for pipes and fittings made from GRP.
Replies
4
Views
266
dave2109
dave2109
Roopesh
  • Locked
  • Question Question
Vent and drains in Hydrogen cross county Pipe lines
Replies
0
Views
90
Roopesh
Roopesh
Esp1holm
  • Locked
  • Question Question
Bending of pipe to ASME B31.3 : dimensions
Replies
2
Views
350
beyee
beyee
GRS1956
  • Locked
  • Question Question
ASME FLUID METERS-ASME PTC19.5
Replies
0
Views
83
GRS1956
GRS1956
ProjEngKLS
  • Locked
  • Question Question
Low Temperature Pipe Specification
Replies
1
Views
136
Shmulik
Shmulik
kyong
  • Locked
  • Question Question
Graphitization
Replies
4
Views
266
davefitz
davefitz
JB23
  • Locked
  • Question Question
Hydrostatic Testing
Replies
3
Views
267
plasgears
plasgears
bermut
  • Locked
  • Question Question
Max thickness / high pressure
Replies
7
Views
506
davefitz
davefitz
SHG
  • Locked
  • Question Question
New allowable Stress In ASME Sec. II
Replies
7
Views
785
davefitz
davefitz
JB23
  • Locked
  • Question Question
Cast Iron Allowable Stress
Replies
1
Views
518
hacksaw
hacksaw
NT
  • Locked
  • Question Question
Australian Standard AS1210 vs. ASME
Replies
2
Views
581
stanier
stanier
RobertF
  • Locked
  • Question Question
Feed pump Inlet Flange thickness
Replies
1
Views
121
MJCronin
MJCronin
Pras
  • Locked
  • Question Question
JIS flanges
Replies
0
Views
188
Pras
Pras
02Vette
  • Locked
  • Question Question
Y14.5-82 vs. Y14.5-94
Replies
2
Views
166
gdtdave
gdtdave
edemarcos
  • Locked
  • Question Question
Flange calculation as per ASME VIII div.1
Replies
3
Views
273
prex
prex
You must log in or register to post here.

Part and Inventory Search

Sponsor

Back
Top